Y-Type Strainers (ANSI 150#, 300#)
Applications:
Strainer can be used in liquid as well as gas line, Regulator and valve protection, steam traps protections, flow meter and pump protections, heat exchanger and refrigeration set protection, Suitable for Hazardous environments.
Y-Strainers and pot basket type strainers is a device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. Where the amount of material to be removed from the flow is relatively small, resulting in long intervals between screen cleanings, the strainer screen is manually cleaned by shutting down the line and removing the strainer cap
Technical Data :
| Design Std. | As per ASME B16.34 |
| Testing Std. | As per API 598 |
| End Connection | Flanged End as per ANSI B16.5, F to F as per ANSI B16.10 |
| Shell Wall Thickness | As per ANSI B16.34 |
| Size 150# & 300# | 50 mm to 300 mm (2” to 12”) |
| Standard Trims | WCB / CF8M, Mesh : SS |
Dimensions 150#
| Size | ~L | ~H |
| 50 | 225 | 190 |
| 80 | 315 | 270 |
| 100 | 370 | 305 |
| 150 | 470 | 400 |
| 200 | 600 | 490 |
| 250 | 695 | 670 |
| 300 | 810 | 800 |
Dimensions 300#
| Size | ~L | ~H |
| 50 | 270 | 190 |
| 80 | 320 | 270 |
| 100 | 355 | 305 |
| 150 | 450 | 400 |
| 200 | 560 | 490 |
| 250 | 730 | 670 |
| 300 | 850 | 800 |
All dimensions are in mm.
Description
General Notes :
- Customization and Automation as per customer requirements.
- Certificate of compliance to EN10204 Type 3.1 as standard.
- Safety stock as per customer requirements.
- 100% factory tested and inspected valves as per standard.
- Other trims also available as per customer requirements.
- Support to customers for other product requirements from sources.
- Consult to Factory for Other Details.
Related products
Armstrong Suction Guides
- Applications-HVAC-system pumping; general purpose pumping; industrial/process pumping (water or glycol based).
- Description-The Armstrong Suction Guides (SG) are multi-function pump fittings that provide a 90° elbow, guide vanes, and an in-line strainer. Suction guides reduce pump installation cost and floor space requirements.
- Materials (MOC)-Cast Iron, ductile iron; grooved, flanged or threaded connections
- Performance range-Suitable for all Armstrong commercial pumps and pumping systems
- Temperature-230°F (110°C)
- Size-1.5” to 20” (40 mm to 500 mm)
Ball Valves One piece, Fire safe-antistatic design, Reduced bore, Flange end (150#, 300#)
Description
One Piece design features eliminates any possible and potential leak paths. Inserts holds the internal assembly in position. This creates a positive metal to metal sealing between body and insert which eliminates the leakage through flange. Ideally suitable for use in oil and gas production, refining and chemical applications. Body material and wetted trim components confirms to NACE standard MR 0175. Fire safe and Anti-static design where Hazardous areas with handling of flammable fuels, gases or chemicals are in use.Technical Data :
- Size Range: DN 50(2") – 200(8")
- Pressure rating : ASME Class 150 to 300
- Temperature range : Upto 260 deg. C
- Seat : PTFE / Carbon Reinforced PTFE
- End Connections : Flanged ASME B16.5
- With & Without ISO PAD
- MOC : WCB, PTFE, CF8, 304 S/S, 316 S/S, MS, CF8M, SS, Carbon R'PTFE
Ball Valves One/Two Piece, Fire Safe-Antistatic design, Full bore Flange end (150#,300#)
Description
One Piece body from DN 15 to DN 40 and Two-piece design from DN 50 to DN 200 valve size. Ideally suitable for use in oil and gas production, refining and chemical applications. Body material and wetted trim components confirms to NACE standard MR 0175. Fire safe and Anti-static design where Hazardous areas with handling of flammable fuels, gases or chemicals are in use.Technical Data :
- Size Range: DN 15 – DN 40 (One piece), DN 50 – DN 200 (Two piece)
- Pressure rating: ASME Class 150 & 300
- Temperature range: Up to 260 deg. C
- Seat: PTFE / Carbon Reinforced PTFE
- End Connections: Flanged ASME B16.5
- With & Without ISO PAD
- MOC : WCB, PTFE, CF8, 304 S/S, 316 S/S, MS, CF8M, SS, Carbon R’PTFE
Ball Valves Three Piece, Full Bore (Screw End, Socket Weld) (150#, 300#, 600#, 800#)
Technical Data :
| Design Std. | As per ISO 17292 & BS 5351 |
| End Connection | Screwed End/Socket Weld |
| Testing & Std. | As per API 598 / ISO 5208 |
| Size, 150# | 15 mm to 50 mm (1/2" to 2") |
Material (MOC)
| Sr. No. | Description | Material |
| 1 | Body | WCB / CF8 / CF8M |
| 2 | Adaptor | WCB / CF8 / CF8M |
| 3 | Ball | CF8 / CF8M |
| 4 | Steam | SS304 / SS316 |
| 5 | Gland | SS304 / SS316 |
| 6 | Seat Ring | PTFE / GFT /CFT |
| 7 | Body Seal | PTFE / GFT /CFT |
| 8 | Gland Packing | PTFE / GFT /CFT |
| 9 | Steam Seal | PTFE / GFT /CFT |
| 10 | Gland Nut | MS/SS304 |
| 11 | Lever Nut | MS/SS304 |
| 12 | Lever | MS/SS |
| 13 | Stud | MS/SS304 |
| 14 | Stud Nut | MS/SS304 |
| 15 | Stud Washer | MS/SS304 |
| 16 | Lever Sleeve | PVC |
Dimensions 150#
| Size | NB | F/F | Thread Type |
| 15 | 12.5 | 62.5 | BSP/NPT/SW |
| 20 | 19.0 | 74.0 | BSP/NPT/SW |
| 25 | 25.0 | 87.0 | BSP/NPT/SW |
| 40 | 38.0 | 109.0 | BSP/NPT/SW |
| 50 | 50.0 | 110.0 | BSP/NPT/SW |
All Dimensions are in mm
BUTTERFLY VALVE Centric, Bi-Directional, Wafer, Lug & Double Flanged Type
Applications :
Ship building, Chemical industry, Power plants, Tank drains, Water works, Sugar mill, Infra, Dead-end, Liquid, Gases, Bulk handling, Fire protection, Cooling systems, Food and Beverages etc.TECHNICAL DATA:
Type : Wafer type, Lug type, Flanged End Wafer type Size: 2” (50 mm) to 36” (900 mm) Lug type Size: 2” (50 mm) to 32” (800 mm) Flanged End: Size: 2” (50 mm) to 24” (600 mm) Design: Centric-Bi directional Pressure: PN6, PN10, PN16 Pressure Class: 150# Seat: EPDM, EPDM-FOOD GRADE, BONDED/LINING, BUNA-N, VITONDesign, Manufacturing and Testing Standards – Technology at a Glance
Kansei Wafer and Lug Centric Bi-directional butterfly valves are designed with few moving parts to provide a long service life with minimum maintenance. “A major advantage of Kansei product is an International compatibility.”
The Superior single piece through shaft design in One-piece body is a reliable and long-life solution for difficult conditions. Valves are with light weight and ideal economic solution for general purpose applications. Lugged valve gives alternative solution where flanged valves are considered and restrictions of space and cost. The Replaceable Seat design isolates the line media connection from body and stem. Replaceable seat design with inbuild molded O-ring eliminates the need for gaskets between the flanges and the valve. Also serve as the flange gasket to make valve more capable. Seat is convenient and economical for field replacement. Sealing is formed by preloaded contact between disc and seat. Shaft seal is suitable for pressure-vacuum service which is also self-adjustable, non-corrosive and heavy duty to absorb the thrust and extends valve cycle life. The Disc hub-edge profile is spherically machined and rounded manually with polishing to provide full concentric seating without obstruction to flow which gives maximum seat life, minimum torque and bubble tight shut-off. Disc-Screw connection with disc is positive, stronger and allows quick and easy disassembly.- Design standard as per EN 593 or API 609 as standard, Another applicable standard on request.
- Testing standard as per API 598 or BS EN 12266-I as standard. bubble tight shut off valve.
- Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
- Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
- Trims available with combination of various Casting material like CI/ DI/ NICI/ NIDI/ WCB/ CF8/ CF8M/ CF3M/ GR. 4A-5A / NAB etc. and Seat Material like EPDM / BUNA-N / VITON etc. Various Coating, Bonding and Lining as per Customer requirement.
- Disc Design is also available without Disc Screw, as per customer requirement.
- 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
- Lever / Gear / Pneumatic / Electric Operation as per customer requirement.
BUTTERFLY VALVE PFA/PTFE Lined, Centric Bi-directional
Applications :
This type of valves are used for multitude and corrosive application, Hazardous and pure liquid, gas, & vapors, free flowing. e.g.: Pharma, foundries and mining, chemicals and petrochemicals, pulp and paper industries, under vessels, & specially used where constant torque and no maintenance is required . Suitable for on-off and control servicesTECHNICAL DATA
Type: Wafer type, Lug type, Flange typeWafer type & Lug type Size: 2” (50 mm) to 12” (300 mm)
Flange type Size: 14” (350 mm) to 16” (400 mm) Design: Centric Bi-directional Pressure: PN10, PN16 Seat: PTFE, PFA, PFA CONDUCTIVE, TFM, TFM CONDUCTIVE Flange Suit To: ANSI 150#Design, Manufacturing and Testing Standards – Technology at a Glance
Kansei PFA/PTFE Lined Centric Bi-directional Butterfly valves are designed to ensure a tight fit around the disc for bubble tight shut off in both direction and provide a constant torque with no maintenance. “A major advantage of Kansei product is an International compatibility.”
The Exceptional Design of one-piece thin disc stem lined with 3mm molded PFA providing high Kv value. The liner and disc are the only two valve parts in contact with the medium. Kansei improved design of disc leading to less deflection at higher pressure and tighter in line seal and for stem sealing system. Primary shaft sealing by preloaded contact between disc and liner hub and the secondary shaft seal by oversizing the shaft diameter in relation to the shaft hole in the liner. The liner and disc are molded and machined to close tolerances to provide low torque, less stress and deformation using opening and closing. PTFE atmospheric seat protects internal components from atmospheric corrosion and provides locating ring for actuator mounting. Fully encapsulated bottom shaft eliminates potential leak path at bottom of valve and eliminates the necessity for further sealing elements- Design standard as per EN 593 or API 609 as standard, another applicable standard on request.
- Testing standard as per API 598 or BS EN 12266-I as standard. 100% bubble tight shut off valve.
- Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
- Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
- Trims available with combination of various Casting material like CI/ DI/ WCB/ CF8M/ CF3M/ GR. 4A-5A/ etc. and Seat Material PTFE.
- 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
- Lever / Gear / Pneumatic / Electric Operation as per customer requirement.
GATE VALVE, Socket weld (800#)
Technical Data
| Design Std. | As per BS 1414 |
| End Connection | Threaded End |
| Testing & Std. | As per API 598 / ISO 5208 |
| Size, 150# & 300# | 15 mm to 80 mm (1/2" to 3") |
Bill Of Material
| Sr. No. | Description | Material |
| 1 | Body | WCB / CF8 / CF8M |
| 2 | Bonnet | WCB / CF8 / CF8M |
| 3 | Wedge | WCB (13% CR) / CF8 / CF8M |
| 4 | Seat Ring | SS410 (13% CR) / CF8 / CF8M |
| 5 | Stem | SS410 / SS304 / SS316 |
| 6 | Gland | SS410 / SS304 / SS316 |
| 7 | Yoke Sleeve | SS410 / SS304 / SS316 |
| 8 | Back Seat Bush | CS/CF8/CF8M |
| 9 | Gasket | EN8 |
| 10 | Gland Packing | MS/SS |
| 11 | Bonet Stud | MALLEABLE IRON |
| 12 | Bolt | MS |
| 13 | Hand wheel | SPW SS304 GRAPHITE FILLED |
| 14 | Hand wheel Nut | GRAPHITE |
Dimensions 800#
| Size | F/F | B |
| 15 | 51 | 62 |
| 20 | 55 | 66 |
| 25 | 63 | 78 |
| 30 | 71 | 85 |
| 40 | 73 | 94 |
| 50 | 83 | 101 |
| 60 | 108 | 127 |
| 80 | 117 | 143 |
All dimensions are in mm.
POT-BASKET TYPE STRAINER (ANSI 150#, 300#)
Applications:
Strainer can be used in liquid as well as gas line, Regulator and valve protection, steam traps protections, flow meter and pump protections, heat exchanger and refrigeration set protection, Suitable for Hazardous environments. Y-Strainers and pot basket type strainers is a device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. Where the amount of material to be removed from the flow is relatively small, resulting in long intervals between screen cleanings, the strainer screen is manually cleaned by shutting down the line and removing the strainer cap.Technical Data :
| Design Std. | As per ASME B16.34 |
| Testing Std. | As per API 598 |
| End Connection | Flanged Drill as per ANSI B16.5 |
| Material | Body : IS 2062, Seal : NBR / PTFE / Graphite + SS, Mesh : SS |
| Shell Wall Thickness | As per ANSI B16.34 |
| Size | 2" to 18", Class 150, 300 |
Dimensions 150#
| Size | F/F | A | B |
| 50 | 320 | 190 | 285 |
| 80 | 360 | 200 | 320 |
| 100 | 400 | 210 | 360 |
| 125 | 460 | 230 | 430 |
| 150 | 510 | 240 | 430 |
| 200 | 560 | 280 | 530 |
| 250 | 810 | 420 | 635 |
| 300 | 890 | 430 | 715 |
Dimensions 300#
| Size | F/F | A | B |
| 50 | 380 | 200 | 305 |
| 80 | 420 | 235 | 400 |
| 100 | 475 | 260 | 405 |
| 125 | 510 | 275 | 435 |
| 150 | 620 | 295 | 490 |
| 200 | 630 | 345 | 560 |
| 250 | 900 | 390 | 690 |
| 300 | 1000 | 440 | 770 |
All dimensions are in mm.
