Armstrong Suction Guides - Image 1
Armstrong Suction Guides - Image 2
Click to enlarge
Armstrong Suction Guides
Armstrong Suction Guides - Image 2

Armstrong Suction Guides

  • Applications-HVAC-system pumping; general purpose pumping; industrial/process pumping (water or glycol based).
  • Description-The Armstrong Suction Guides (SG) are multi-function pump fittings that provide a 90° elbow, guide vanes, and an in-line strainer. Suction guides reduce pump installation cost and floor space requirements.
  • Materials (MOC)-Cast Iron, ductile iron; grooved, flanged or threaded connections
  • Performance range-Suitable for all Armstrong commercial pumps and pumping systems
  • Temperature-230°F (110°C)
  • Size-1.5” to 20” (40 mm to 500 mm)
ENQUIRY!
Description

Benefits & Features

  • No separate in-line strainers, long-radius elbows and superfluous piping. (less material cost)
  • Fewer pipe connections, down from five (or more) to two (less labor cost)
  • Reduced floor space requirements of up to 20% compared to traditional piping.
  • Use of Flow-Trex valves yields further space savings.

Related products

Armstrong 4300 vertical in-line pumps

ENQUIRY!
  • Applications-HVAC-system pumping; light industrial/ process pumping (water or glycol based)
  • Description-The Armstrong 4300 pipe-mounted pumps are designed for space-saving installation, high operating efficiency, and long service life
  • Materials(MOC)-Cast, ductile iron or bronze casing, Cast iron or bronze impeller
  • Configuration-Outside balanced or inside single spring mechanical seal
  • Performance range-Up to 28,000 USgpm (1,800 L/s) Flow; up to 500 ft (150 m) Head
  • Temperature-300oF (150oC)
  • Power Range-1 hp to 1250 hp (0.75 kW to 900 kW)
  • Size-1.5″ to 20” (40 mm to 500 mm)
Quick view

Armstrong Air & Dirt Separators

,
ENQUIRY!
  • Applications-Dirt and air removal from hydronic and HVAC systems.
  • Description-The Armstrong dirt & air separators (DAS) are designed to eliminate trapped air and suspended dirt particles associated with the start-up and maintenance of hydronic and HVAC systems.
  • Materials (MOC)-Carbon steel (shell), stainless steel (coalescing medium), styrene butadiene rubber (gasket)
Quick view

Armstrong Design Envelope 4300 Pumps

ENQUIRY!
  • Applications-HVAC-system pumping and control; general purpose pumping; industrial/process pumping and control. (water or glycol based)
  • Description-Pipe-mounted UL 778 pumping unit with integrated intelligent controls for space-saving installation and superior energy performance. Saves up to 75% in energy over comparable traditional constant speed or variable frequency operated pump installations. Remote services through internet to enhance reliability and sustain optimal performance over life of pumps.
  • Materials(MOC)-Ductile iron e-coated casing, Stainless steel impeller, Sintered silicon carbide mechanical seal
  • Configuration-On-board Intelligent Variable Speed controls with Sensorless control. Split-coupling design and outside balanced or inside single spring mechanical seal. Controls enclosure UL type 12 or UL type 4X for outdoor applications. 0.33-50hp range standard with DEPM motors that reduce losses by more than 20% over NEMA Premium efficiency. Network capable for remote performance management services.
  • Performance range-25 to 25,000 USgpm (1.5 to 1500 L/s) flow; 10 to 300 ft (3 to 90 m) head (composite curves available)
  • Temperature-300oF (150oC)
  • Power Range-0.33 hp to 1250 hp (0.25 kW to 900 kW)
  • Size-1″ to 20″ (25 mm to 500 mm)
Quick view

Armstrong Design Envelope 4302 Dualarm Pumps

ENQUIRY!
  • Applications-HVAC system pumping; general purpose pumping; industrial/process pumping (water or glycol based) Armstrong Design Envelope Pumps with integrated controllers are OSHPD pre-approved!
  • Description-Pipe-mounted 2-pump unit with integrated intelligent controls for space-saving installation, superior energy performance, and full redundancy or parallel-pumping operation. Saves up to 75% in energy over comparable traditional constant speed or variable frequency operated pump installations.
  • Materials (MOC)-Cast iron or ductile iron casing, Cast iron or bronze impeller, Sintered silicon carbide mechanical seal
  • Configuration-On-board Intelligent Variable Speed controls with Sensorless or Parallel Sensorless control. Controls enclosure UL type 12 or UL type 4X (outdoor applications). Available with NEMA premium motors. Outside balanced or inside single spring mechanical seal
  • Performance range-Up to 1250 USgpm flow and 250 ft head (80 L/s, 76 m)
  • Temperature-250°F (121°C)
  • Power Range-0.33 hp to 75 hp (0.25 kW to 55 kW)
  • Size –1″ to 8” (25 mm to 200 mm)
Quick view

Armstrong Design Envelope Integrated Pumping System (IPS 4000)

,
ENQUIRY!
  • Applications-Multi-pump control for heated – or chilled – water system optimization in buildings.
  • Description-The Design Envelope Integrated Pumping System (IPS 4000) is an advanced multi-zone control that directly integrates with pumping units to optimize energy performance, system handling, and installation.
  • Materials (MOC)-Enclosure, circuitry, software
  • Configuration-Integrates seamlessly with Armstrong Design Envelope pumps in a headered configuration.
  • Performance range-Up to 8 pumps, 16 zones (variable primary, secondary or tertiary) and 8 flow sensitive equipment (variable primary) IPS 4001w / IPS 4501w for up to 3 pumps, 3 zones and 3 flow sensitive equipment IPS 4002w / IPS 4502w for up to 4 pumps, 6 zones and 4 flow sensitive equipment IPS 4003w / IPS 4503w for up to 6 pumps, 12 zones and 6 flow sensitive equipment IPS 4004w / IPS 4504w for up to 8 pumps, 16 zones and 8 flow sensitive equipment
  • Power Range-No limitations in system size and capacity.
  • Size-No limitations in system size.
Quick view

Armstrong Expansion Tanks

,
ENQUIRY!
  • Applications-Pressure stabilization in water based mechanical systems such as booster installations, boiler systems, and chiller plants
  • Description-Armstrong Expansion Tanks are designed to reduce tank sizes by up to 80% over standard designs. Expansion tanks use compressed air to maintain system pressures by accepting and expelling the changing volume of water as it heats and cools. Diaphragm or bladder tank designs isolate the expanded water from the pressure controlling air cushion – which is pre-charged at the factory and can be adjusted in the field to meet final system requirements
  • Materials (MOC)-Carbon steel (shell), heavy duty Butyl (diaphragm)
  • Performance range-AET plain steel expansion tanks: 15 to 525 USgpm flow. AX diaphragm expansion tanks: 8 to 211 USgpm flow. Type L bladder type expansion tanks: 10 to 1056 USgpm flow.
Quick view

POT-BASKET TYPE STRAINER (ANSI 150#, 300#)

,
ENQUIRY!

Applications:

Strainer can be used in liquid as well as gas line, Regulator and valve protection, steam traps protections, flow meter and pump protections, heat exchanger and refrigeration set protection, Suitable for Hazardous environments. Y-Strainers and pot basket type strainers is a device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. Where the amount of material to be removed from the flow is relatively small, resulting in long intervals between screen cleanings, the strainer screen is manually cleaned by shutting down the line and removing the strainer cap.

Technical Data :

Design Std. As per ASME B16.34
Testing Std. As per API 598
End Connection Flanged Drill as per ANSI B16.5
Material Body : IS 2062, Seal : NBR / PTFE / Graphite + SS, Mesh : SS
Shell Wall Thickness As per ANSI B16.34
Size 2" to 18", Class 150, 300

Dimensions 150#

Size F/F A B
50 320 190 285
80 360 200 320
100 400 210 360
125 460 230 430
150 510 240 430
200 560 280 530
250 810 420 635
300 890 430 715

Dimensions 300#

Size F/F A B
50 380 200 305
80 420 235 400
100 475 260 405
125 510 275 435
150 620 295 490
200 630 345 560
250 900 390 690
300 1000 440 770

All dimensions are in mm.

Quick view

Y-Type Strainers (ANSI 150#, 300#)

,
ENQUIRY!

Applications:

Strainer can be used in liquid as well as gas line, Regulator and valve protection, steam traps protections, flow meter and pump protections, heat exchanger and refrigeration set protection, Suitable for Hazardous environments. Y-Strainers and pot basket type strainers is a device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. Where the amount of material to be removed from the flow is relatively small, resulting in long intervals between screen cleanings, the strainer screen is manually cleaned by shutting down the line and removing the strainer cap

Technical Data :

Design Std. As per ASME B16.34
Testing Std. As per API 598
End Connection Flanged End as per ANSI B16.5, F to F as per ANSI B16.10
Shell Wall Thickness As per ANSI B16.34
Size 150# & 300# 50 mm to 300 mm (2” to 12”)
Standard Trims WCB / CF8M, Mesh : SS

Dimensions 150#

Size ~L ~H
50 225 190
80 315 270
100 370 305
150 470 400
200 600 490
250 695 670
300 810 800

Dimensions 300#

Size ~L ~H
50 270 190
80 320 270
100 355 305
150 450 400
200 560 490
250 730 670
300 850 800
 

All dimensions are in mm.

Quick view