Belimo Ball Valves
Applications
The ball valve offers high close-off or change-over capabilities without leakage – that’s efficiency.
Achieve Control and Reliability
The R2, R3 and R6 series ball valves are available with non-spring return, spring return or electronic fail-safe actuators offering high close-off capabilities. The industrial ball valve series is a great solution for low and medium pressure steam applications up to 1000 kPa closed off pressure and applications that operate with a media temperature to 120º C.
High Performance for Aggressive Applications
Belimo industrial ball valves feature 2-way and 3-way configurations operated by rotary actuators. The actuators are controlled by a standard voltage for on/off, modulating, or floating point control which moves the valve to the position dictated by the control system. The series are Leakage rate A, air bubble tight preventing energy loss, which reduces operating costs.
Specification
Pattern: 2-way, 3-way
kvs range (kvs): 1.1…3.0 kvs, 3.1…6.5 kvs, 6.6…14 kvs, 15…40 kvs, 41…170 kvs, 171…1000 kvs
Valve size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm
Pipe connection: Flange, Internal thread
Consulting Engineers
Your analytical skillset makes you an invaluable asset to your organisation. Though your job is to design systems and operating sequences that meet energy codes to make facilities run more efficiently, you constantly find yourself collecting information and analysing data when it could be spent looking for new and innovative ways to save energy and improve building performance. Belimo ball valves provide:
- Models available with tight close-off up to 1000 psi to ensure dependable operation
- Spring return, non fail-safe, and electronic fail-safe actuator to drive the valve open or closed during power failure to meet sequence requirements
- NEMA 4 actuator options for harsh outdoor applications
- High Kvs full port ball valves for isolation applications
- Customer focused organisation with support documentation requirements for plans and specifications
Contractors & Distributors
- Easy selection, installation, and hassle-free service
- Models with tight close-off up to 1400 kPa to ensure dependable operation
- Range of media temperature ratings suited for steam, chilled and hot water applications
- Assembled with rotary actuators offering easy field assembly and installation saving you time
- Fast delivery with extensive support
Building Owners
Building expansion and tenant improvements are a constant challenge to your facility department and the value of your property. You are having difficulty keeping clients comfortable, identifying ways to optimise your HVAC system, and preserving capital budgets. Belimo ball valves can offer:
- High performance VB series ANSI Class I50 or 300 carbon steel bodies which are ideal for aggressive applications
- 0% leakage or ANSI Class VI rating increasing plant Delta T efficiency and building comfort
- Serviceable trim components on VS and VSS series valves reducing replacement cost
- High Kvs ball valves with minimal pressure drop, which are ideal for isolation application where pumping costs are high
- NEMA 4 actuator options for harsh outdoor applications which assure long service life
Facility Managers
Higher energy prices combined with costly building inefficiencies are making your job more and more difficult to perform. While you should be looking for new and innovative ways to reduce energy consumption and improve facility performance, you’re simply too busy dealing with employees, troubleshooting technical issues, and trying to combat costly problems with more money. Belimo ball valves can provide:
- Excellent control stability maintaining occupant comfort level
- Better control to prevent “hunting” of the control loop, increasing life span of actuator and valve
- Models available with tight close-off up to 1400 kPa to ensure dependable operation
- Easy selection, installation, and service for improvement projects or retrofits
- Fast delivery and online technical support
ESCO
You are tasked with communicating to organisations how they can save energy and improve performance — but key opportunities are passing you by. Why? Most of your time is spent searching for new product innovations that are backed by proven and reliable energy savings data. Belimo ball valves offer:
- ANSI Class VI or 0% leakage rating offering increased plant Delta T efficiency and building comfort
- Tight close-off up to 1400 kPa to provide dependable performance
- Actuator to utilise full control signal for maximum resolution and precise control
- High Kvs ball valves with minimal pressure drop. These are ideal for isolation application where pumping costs are high
- Better control to prevent “hunting” of the control loop, increasing life span of actuator and valve
Commissioning Agents / Balancing Contractors
The responsibilities of your job are complex. Between managing and reviewing projects, along with balancing and commissioning systems, you’ve got a lot on your plate. What you’re looking for is an innovative product with proven energy savings data that meets your facility’s specifications without the hassle of a complex installation and/or costly maintenance requirements. Belimo ball valves offer:
- Manual override function to provide easy troubleshooting capabilities during start-up and commissioning
- MFT models with field selectable control and feedback signal, and running time to match design sequences and controller requirements
- Trending with Multi-Function Technology (MFT) models for system diagnosis
- Self-cleaning ball valve technology to provide superior clog resistance and ensure flow is maintained in heating and cooling systems
Related products
Ball Valves One/Two Piece, Fire Safe-Antistatic design, Full bore Flange end (150#,300#)
Description
One Piece body from DN 15 to DN 40 and Two-piece design from DN 50 to DN 200 valve size. Ideally suitable for use in oil and gas production, refining and chemical applications. Body material and wetted trim components confirms to NACE standard MR 0175. Fire safe and Anti-static design where Hazardous areas with handling of flammable fuels, gases or chemicals are in use.
Technical Data :
- Size Range: DN 15 – DN 40 (One piece), DN 50 – DN 200 (Two piece)
- Pressure rating: ASME Class 150 & 300
- Temperature range: Up to 260 deg. C
- Seat: PTFE / Carbon Reinforced PTFE
- End Connections: Flanged ASME B16.5
- With & Without ISO PAD
- MOC : WCB, PTFE, CF8, 304 S/S, 316 S/S, MS, CF8M, SS, Carbon R’PTFE
Ball Valves Three Piece Full bore with Locking device (PN40/PN63) Screw End, Socket Weld, Butt Weld
Description
Three Piece body from DN 15 to DN 100. Swing out economical design for Industrial & Process applications. Investment casting for body and end cap. End connections with Screwed end – Socket weld – Butt weld. Blow out proof stem design with LOTO Features for Lock out and Tag out arrangement.
Technical Data :
- Size Range: DN 15(1/2”) – DN 100 (4”)
- Pressure rating: PN40 & PN63
- Temperature range: Up to 260 deg. C
- End Connections: Screwed End, Socket Weld, Butt Weld
- MOC : WCB, PTFE, CF8, 304 S/S, 316 S/S, MS, CF8M, SS, Carbon R’PTFE
Ball Valves Three Piece, Full Bore (Screw End, Socket Weld) (150#, 300#, 600#, 800#)
Technical Data :
| Design Std. | As per ISO 17292 & BS 5351 |
| End Connection | Screwed End/Socket Weld |
| Testing & Std. | As per API 598 / ISO 5208 |
| Size, 150# | 15 mm to 50 mm (1/2" to 2") |
Material (MOC)
| Sr. No. | Description | Material |
| 1 | Body | WCB / CF8 / CF8M |
| 2 | Adaptor | WCB / CF8 / CF8M |
| 3 | Ball | CF8 / CF8M |
| 4 | Steam | SS304 / SS316 |
| 5 | Gland | SS304 / SS316 |
| 6 | Seat Ring | PTFE / GFT /CFT |
| 7 | Body Seal | PTFE / GFT /CFT |
| 8 | Gland Packing | PTFE / GFT /CFT |
| 9 | Steam Seal | PTFE / GFT /CFT |
| 10 | Gland Nut | MS/SS304 |
| 11 | Lever Nut | MS/SS304 |
| 12 | Lever | MS/SS |
| 13 | Stud | MS/SS304 |
| 14 | Stud Nut | MS/SS304 |
| 15 | Stud Washer | MS/SS304 |
| 16 | Lever Sleeve | PVC |
Dimensions 150#
| Size | NB | F/F | Thread Type |
| 15 | 12.5 | 62.5 | BSP/NPT/SW |
| 20 | 19.0 | 74.0 | BSP/NPT/SW |
| 25 | 25.0 | 87.0 | BSP/NPT/SW |
| 40 | 38.0 | 109.0 | BSP/NPT/SW |
| 50 | 50.0 | 110.0 | BSP/NPT/SW |
All Dimensions are in mm
Belimo Energy Valve™
Applications
The Belimo Energy Valve™ is a pressure independent control valve that in addition monitors coil performance and energy consumption. On request, it can also manage the Delta T and communicates with the IoT cloud.
Energy savings you can see
The Belimo Energy Valve™ provides pressure-independent flow control and transparent monitoring of heating or chilling systems. This ensures that it is not operated with too low a temperature spread (delta T). By measuring, calculating and visualising important system data and with the performance reports provided by Belimo, energy-efficient system operation is guaranteed for the entire service life. The Belimo Energy Valve™ can be connected to the Belimo Cloud, providing easy access to data and reports – anytime, anywhere.
Thermal energy management and billing made easier than ever
The unity of the certified Belimo Thermal Energy Meter™ and the enhanced Belimo Energy Valve™ allows for transparent thermal energy management. The two worlds of "energy control" and "certified energy measurement and billing" are now being united. Accurately measure and monitor thermal flows and energy consumption in heating and cooling systems with direct IoT-based cost accounting using a single device. The new MID-approved Thermal Energy Meters assure high accuracy and reliability, allowing for easy and efficient billing. Reliable measurement is only the beginning. The Belimo Energy Valve™ instantly controls the thermal flow and optimises the energy supply to the user. With this important combination Belimo is stepping into a new era of integrated thermal energy management and is bringing together what belongs together.
Belimo Energy Valve™ in HVAC Applications
This is a selection of common HVAC applications in which the Belimo Energy Valve™ comes into use. After a short description of each application, common reasons for poor efficiency or performance are identified. There is an explanation of how the EV addresses these problems, and which control modes and settings are recommended to achieve optimal performance.
Know where the energy is going
The Belimo Energy Valve™ is an IoT device, i.e. an intelligent pressure-independent valve that can be connected to the Belimo Cloud. Unique functions such as the Delta-T manager or the possibility of direct power control provide clarity, enhance efficiency and reduce costs. The Belimo Energy Valve™ consists of a 2-way or 3-way characterised control valve, a volumetric flow meter, two temperature sensors and an actuator with integrated logic.
Specification
Pipe connection: Flange, Internal and external thread
Certification: MID / EN 1434
Flow range (m³/h): 0.02...2.39 m³/h, 2.4...6.49 m³/h, 6.5...17.5 m³/h, 17.6...40 m³/h, 41...162 m³/h
Valve size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm
Fail-safe function: Non-fail-safe, Fail-safe
Belimo Globe Valves
Applications
The Globe valve series are available in DN 15 to DN 250 with both threaded and flanged end fittings to meet the requirements of various applications, incl. high pressures and high temperatures.
Greater Force and Flexibility
The globe valve series are available in sizes from DN15 - 150 which fulfil the requirements of PN16 and PN25 applications. Utilising either bronze or stainless steel trim and fitted with either spring return, non-spring return, or electronic fail-safe actuators, globe valves are the perfect fit for HVAC equipment such as air handling units, terminal equipment, and hydronic systems with primary and secondary loops of water or steam service.
More Strength for Higher Pressure Demands
The Belimo globe valve actuators are designed to withstand the rigorous demands of many HVAC applications. With its innovative quick connect coupler, the globe valve actuator can be retrofitted and installed and adapted in no time.
Specification
Pattern: 2-way, 3-way
Valve operations mode: Diverting, Mixing, Mixing/Diverting
PN: 16, 25
kvs range (kvs): 1.1...3.0 kvs, 3.1...6.5 kvs, 6.6...14 kvs, 15...40 kvs, 41...170 kvs, 171...1000 kvs
Valve size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm, 200 mm, 250 mm
Pipe connection: Flange, Internal thread
Belimo Linear Damper Actuators
Applications
Linear damper actuators are available with a variety of stroke lengths to meet specific application requirements.
Efficient Push and Pull
Belimo linear damper actuators are available with stroke lengths of 100, 200 or 300mm and on/off, floating point or modulating control. The comprehensive range of 150 N force to 450 N force are ideal for a wide range of applications such as louvres, diffusers, greenhouse windows and anywhere linear motion is required.
Powerful Linear Motion
Whether mounted horizontal or vertical, the actuator delivers a linear push or pull motion providing reliable and efficient performance for louvres, diffusers, skylights, greenhouse windows, or when retrofitting a system. Linear actuators offer simple installation, cost effective operation and flexible commissioning options.
Specification
Force (N): 50 N, 100 N, 150 N
Stroke: 60 mm: 100 mm
Voltage AC/DC: 120 V, 230 V, 24 V
Control type: Open/close, 3-point, Modulating
Running time: 2.5...19 s, 50...79 s, 100...150 s
Electrical connection: Cable, Connector plug
Belimo Outdoor / Protected Damper Actuators
Applications
Belimo IP66/67 NEMA 4X actuators are particularly suitable for utilisation in outdoor applications and are protected against UV radiation, rain/snow, dirt, dust, air humidity.
Reliability and Performance
Belimo IP66 / 67 housing design combined with extensive independent testing provides a complete, unmatched protection in extreme environments. The housings are weather-tight and corrosion resistant for the harshest indoor and outdoor conditions with UV protection. For high humidity or low temperature (-40°C) applications a heater option is available. These actuators are ideal for rooftop applications, indoor swimming pools, wood drying kilns, agriculture and food industries.
Belimo's unique IP66 / 67 housing incorporates its damper actuator and valve product lines. The housing design provides complete, unmatched protection in extreme environments.
Specification
Fail-safe function: Non-fail-safe, Fail-safe
Torque: 6 Nm, 10 Nm, 16 Nm, 20 Nm, 40 Nm, 160 Nm
Voltage AC/DC: 120 V, 230 V, 24 V, 48 V, 72 V
Control type: Open/close, 3-point, Modulating, Communicative, Hybrid (communicative / analogue)
Running time: 2.5…19 s, 20…49 s, 50…79 s, 80…99 s, 100…150 s, adjustable
Running time (fail-safe): 4 s, 20 s, 30 s, 35 s
Auxiliary switches: 1x SPDT, 2x SPDT
Electrical connection: Cable: Terminals
Belimo Variable Air Volume (VAV)
Applications
Belimo VAV actuators provide solutions for volumetric flow and pressure control for VAV and CAV units.
The Cost-efficient Way to Control Room Climate
Human health, well-being and work performance are crucially influenced by room climate. Belimo room and system solutions – a complete range of products for cost-efficient motorisation and control of zones and single rooms – are proven in numerous installations all over the world.
Better Working Atmosphere
The Belimo volumetric flow and pressure control products are suitable for different application: room air solution for working and public areas, pressure air application for sensitive working areas, room air and safety applications for trade and industry.
Specification
VAV application: Comfort, Process Air, Residential
VAV family: VAV-Compact, VAV-Universal
Air medium: Contaminated, Normal
Torque (Nm): 4 Nm, 5 Nm, 6 Nm, 8 Nm, 10 Nm, 20 Nm
Control type: Modulating, Communicative, Hybrid (communicative / analogue)
Fail-safe function: Non-fail-safe, Fail-safe
