Showing 73–84 of 131 results
Belimo Zone Valves
Applications
Belimo ZoneTight™ zone valves and actuators are designed for maximum efficiency in tight spaces.Efficient in Every Way
Designed for maximum efficiency in tight spaces, Belimo’s ZoneTight zone valve offering sets new design and performance standards for both pressure dependent and pressure independent zoning applications. Unlike short stroke globe valves, the self-cleaning ball helps minimise energy losses caused by clogging and eliminates overflow from pump pressure seat lift. In addition, high close-off capabilities ensure shut-off and allow for true equal percentage flow characteristics.
Super Compact and Versatile
Unlike short stroke globe valves, the zone tight self-cleaning ball helps minimise energy losses caused by clogging and eliminates overflow from pump pressure seat lift. Also, high close-off capabilities ensure shut-off (0% A – AB leakage) and allow for true equal percentage flow characteristics. Belimo’s ZoneTight zone valves are designed for maximum efficiency in tight spaces.
Specification
Product type: Valve, Valve-actuator unit Pattern: 2-way, 3-way Pressure-independent: YES, NO kvs range (kvs): 1.1...3.0 kvs, 3.1...6.5 kvs, 6.6...14 kvs Valve size (mm): 15 mm, 20 mm, 25 mm Fail-safe function: Fail-safe Voltage AC/DC: 230 V, 24 V Control type: Open/close Running time: 2.5...19 s Electrical connection: Cable
BUTTERFLY VALVE Centric, Bi-Directional, Wafer, Lug & Double Flanged Type
Applications :
Ship building, Chemical industry, Power plants, Tank drains, Water works, Sugar mill, Infra, Dead-end, Liquid, Gases, Bulk handling, Fire protection, Cooling systems, Food and Beverages etc.TECHNICAL DATA:
Type : Wafer type, Lug type, Flanged End Wafer type Size: 2” (50 mm) to 36” (900 mm) Lug type Size: 2” (50 mm) to 32” (800 mm) Flanged End: Size: 2” (50 mm) to 24” (600 mm) Design: Centric-Bi directional Pressure: PN6, PN10, PN16 Pressure Class: 150# Seat: EPDM, EPDM-FOOD GRADE, BONDED/LINING, BUNA-N, VITONDesign, Manufacturing and Testing Standards – Technology at a Glance
Kansei Wafer and Lug Centric Bi-directional butterfly valves are designed with few moving parts to provide a long service life with minimum maintenance. “A major advantage of Kansei product is an International compatibility.”
The Superior single piece through shaft design in One-piece body is a reliable and long-life solution for difficult conditions. Valves are with light weight and ideal economic solution for general purpose applications. Lugged valve gives alternative solution where flanged valves are considered and restrictions of space and cost. The Replaceable Seat design isolates the line media connection from body and stem. Replaceable seat design with inbuild molded O-ring eliminates the need for gaskets between the flanges and the valve. Also serve as the flange gasket to make valve more capable. Seat is convenient and economical for field replacement. Sealing is formed by preloaded contact between disc and seat. Shaft seal is suitable for pressure-vacuum service which is also self-adjustable, non-corrosive and heavy duty to absorb the thrust and extends valve cycle life. The Disc hub-edge profile is spherically machined and rounded manually with polishing to provide full concentric seating without obstruction to flow which gives maximum seat life, minimum torque and bubble tight shut-off. Disc-Screw connection with disc is positive, stronger and allows quick and easy disassembly.- Design standard as per EN 593 or API 609 as standard, Another applicable standard on request.
- Testing standard as per API 598 or BS EN 12266-I as standard. bubble tight shut off valve.
- Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
- Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
- Trims available with combination of various Casting material like CI/ DI/ NICI/ NIDI/ WCB/ CF8/ CF8M/ CF3M/ GR. 4A-5A / NAB etc. and Seat Material like EPDM / BUNA-N / VITON etc. Various Coating, Bonding and Lining as per Customer requirement.
- Disc Design is also available without Disc Screw, as per customer requirement.
- 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
- Lever / Gear / Pneumatic / Electric Operation as per customer requirement.
BUTTERFLY VALVE EPDM & EPDM + PTFE seated Centric design
Applications :
Food and beverages, slurries, pneumatic conveying, dry bulk conveying, chemicals, paper stock, mineral processing. This type of valve is highly suitable where bubble-tight shut off with maximum flow area is required.
Suitable for on-off and control services
TECHNICAL DATA
Size: 2” (50 mm) to 20” (500 mm)
Type: Wafer & Lug Design: Centric Bi-directional Pressure: PN10, PN16 Seat: EPDM, PTFE + EPDM Flange Suit To: ANSI 150#, PN10, PN16, BS TableDesign, Manufacturing and Testing Standards – Technology at a Glance
Kansei EPDM and PTFE Centric Bi-directional Butterfly valves are designed to ensure a bubble tight shut off in both direction and provide a Maximum flow area. “A major advantage of Kansei product is an International compatibility.”
The Exclusive Design of two-piece body with one-piece wafer-thin disc stem provide the very less obstruction to flow. Body locating holes provide easy placing and perfect centering of the valve between the flanges. Rounded & Buffed disc edge gives full concentric sealing with lower torque, which gives longer seat life. Kansei designed Primary stem sealing accomplished by a preinstalled contact between seat surface and rounded disc hub area which overtake the pressure rating of valve and prevents the leakage through the stem area to atmosphere. An inbuild ‘O’ ring on the seat surface provide flange sealing and eliminates the need for additional flange gasket. The seat is completely field replaceable and isolated from line media which allows superior performance of valve with extended service life. The seat design in such a way to ensure seal drop-tight and bi-directional at low to high pressure range. Split body for easy maintenance. This product is not recommended for dead end services. This type of valve can be installed in vertical or horizontal pipeline and any intermediate orientation.- Design standard as per EN 593/BS 5155 as standard, another applicable standard on request.
- Testing standard as per API 598 or EN 12266-1 as standard.
- Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
- Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
- Trims available with combination of various Casting material like CI/ DI/ WCB/ CF8/ CF8M/ CF3M/ GR. 4A-5A/ etc. and Seat Material like EPDM / EPDM+PTFE etc.
- 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
BUTTERFLY VALVE High Performance Double Offset
Applications :
Pharma, Military, Sour gas, Food Processing, Vacuum and Oxygen services, Steam services, Dead-end services, Fire, Chemical industry e.g. Chlorine-Ammonia etc., Reverse Osmosis, Slurry services, Modulating or Special fluids where Flow control is Important.TECHNICAL DATA
Size: 2” (50 mm) to 36” (900 mm)
Type: Wafer, Lug, Flange Design: Eccentric-Double offset Pressure: ANSI Class 150-300 Seat: RTFE, PTFE, UHMWPE, Metal, Fire Safe Flange Suit To: ANSI 150#,300#Design, Manufacturing and Testing Standards – Technology at a Glance
Kansei Wafer, Lug and Flanged Double offset butterfly valves are designed to ensure minimum seat wear, zero leakage shutoff throughout the full pressure range and Uni-Bidirectional to provide a long service life with minimum maintenance. “A major advantage of Kansei product is an International compatibility.”
The Superior two-piece stem design and double offset disc/stem design allows high cycling and eliminates seat deformation when the disc is in the open position. At the initial point of disc opening, the offset disc produces a cam action and pulling the disc from the seat. During opening, disc does not contact the seat which ensures the maximum seat service life with reduced operating torques. The first offset is by locating the stems downstream of the center line of the seat which allows 360-degree unobstructed sealing surface. The second offset is by locating the stems off-center of the vertical axis of the seat. As the valve closes, the camming action converts the rotary motion of the disc to a linear motion which effectively push the disc on seat. Mounting pads integrally casted which provides direct mounting of Gear box and Actuators on valves. Torque requirements of the Kansei High performance double offset valve is significantly lower. The seat is completely isolated from all contact with the line media which allows superior performance of valve with extended service life. Serrations of the seat retainer ring and body secure the seat assembly in place irrespective of disc position. Line media seals to Zero-leakage in both directions and seat is self-adjusting to absorb wear and temperature changes. Replacement of seat is also easy without disturbing the disc or stem. The seat design in such a way to ensure seal drop-tight and bi-directional at low to high pressure range. Seat incorporates a Stainless-Steel wire winding with U-shape envelope to provide better seat life. The wire allows flexibility in both direction of flow. Fire safe: Kansei High performance double offset valves having firesafe seat design options in wafer, lug and flange valves. Fire safe design combines superior performance, extended service life. In normal service, the fire safe design with Soft seat and Metal seat to ensure zero-leakage in both directions of line media flow in full rated pressure and temperature range. In the fire condition, soft seat will be destroyed either partially or fully by excessive heat and metal seat will take place to provide constant sealing. Fire safe packing arrangement with three rings of graphite to create a superior and high temperature sealing.- Design standard as per EN 593 or API 609 (cat. B) as standard, another applicable standard on request.
- Testing standard as per API 598 and FCI 70-2.
- Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
- Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
- Trims available with combination of various Casting material like WCB/ CF8/ CF8M/ CF3M/ GR. 4A-5A/ NAB/ Aluminum Alloys etc. and Seat Material like RTEF/ PTFE/ UHMWPE/ METAL/ FIRE SAFE.
- 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
BUTTERFLY VALVE Large Size Double Flanged, Eccentric Design
Applications:
Power plants, Water works, Municipal water treatment, Cooling systems, Industrial applications etc.TECHNICAL DATA
Suitable for on-off and control services Size: 20” (500 mm) to 80” (2000 mm) Type: Double Flanged Design: Eccentric Pressure: PN6, PN10, PN16, PN20, PN25 Seat: EPDM, BUNA-N, VITON Flange Suit To: PN6, PN10, PN16, PN20, PN25,ANSI, JIS ANSI, BS, DIN, ISO, ISDesign, Manufacturing and Testing Standards – Technology at a Glance
Kansei Double flanged Eccentric Large Butterfly valves are designed to accommodate Flange drilling JIS, ANSI, DIN, BS. Also providing dead-end service capability with downstream piping removed. Each size valve flange has been designed to have the maximum outside diameter and maximum thickness of the nominated flange standards. K35 type valves provides the robust features to ensure reliable performance and long service life. “A major advantage of Kansei product is an International compatibility.”
The valve face to face in accordance with EN 558, BS 5155 Short, ISO 5752 Table 4, EN-593 and AWWA C-504, AWWA C-207. Mounting cast flange designed in accordance to ISO 5211. The Replaceable Seat design meets the requirements of seat replaceability on field without special tooling, dismantling and removing the valve from line. Also provide better shut-off and longer service life. The seat is of a molded construction and fits easily into the body which also reduce seating torque with disc edge contours. The Seat is adjustable to optimize the required shut-off tightness to comply the torque both for unidirectional and directional operation. The Eccentric design provides energy efficient flow control. Stainless steel disc edge protects against corrosion and eliminates the possibility of restricted sealing. Upper and Lower shaft bearings prevent shaft deflection and provide optimum guidance to increase the valve life. High strength and Full diameter Shafts remain dry and provides positive disc control with a minimum flow restriction. Sleeve bearings are self-lubricated which allows valve installation with the shaft vertical or horizontal. Thrust bearings are provided with the adjustment to ensure good axial positioning of the disc due to forces applied by seat and shaft seals to the disc. The secondary seal is provided to seal the bearing area from environment, and it will also act as a primary seal in account of failure of primary seal, Rubber lining is additional option for this product.- Design standard as per EN 593, AWWA C-504, AWWA C-207 as standard, another applicable standard on request.
- Testing standard as per API 598 or BS EN 12266-I as standard. 100% bubble tight shut off valve.
- Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
- Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
- Trims available with combination of various Casting material like CI / DI / NICI / NIDI / WCB / CF8 / CF8M / CF3M/ GR. 4A-5A / NAB etc. and Seat Material like EPDM / BUNA-N / VITON etc. Coating and Lining as per Customer requirement.
- 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
- Gear / Pneumatic / Electric / Hydraulic Operation as per customer requirement.
BUTTERFLY VALVE PFA/PTFE Lined, Centric Bi-directional
Applications :
This type of valves are used for multitude and corrosive application, Hazardous and pure liquid, gas, & vapors, free flowing. e.g.: Pharma, foundries and mining, chemicals and petrochemicals, pulp and paper industries, under vessels, & specially used where constant torque and no maintenance is required . Suitable for on-off and control servicesTECHNICAL DATA
Type: Wafer type, Lug type, Flange typeWafer type & Lug type Size: 2” (50 mm) to 12” (300 mm)
Flange type Size: 14” (350 mm) to 16” (400 mm) Design: Centric Bi-directional Pressure: PN10, PN16 Seat: PTFE, PFA, PFA CONDUCTIVE, TFM, TFM CONDUCTIVE Flange Suit To: ANSI 150#Design, Manufacturing and Testing Standards – Technology at a Glance
Kansei PFA/PTFE Lined Centric Bi-directional Butterfly valves are designed to ensure a tight fit around the disc for bubble tight shut off in both direction and provide a constant torque with no maintenance. “A major advantage of Kansei product is an International compatibility.”
The Exceptional Design of one-piece thin disc stem lined with 3mm molded PFA providing high Kv value. The liner and disc are the only two valve parts in contact with the medium. Kansei improved design of disc leading to less deflection at higher pressure and tighter in line seal and for stem sealing system. Primary shaft sealing by preloaded contact between disc and liner hub and the secondary shaft seal by oversizing the shaft diameter in relation to the shaft hole in the liner. The liner and disc are molded and machined to close tolerances to provide low torque, less stress and deformation using opening and closing. PTFE atmospheric seat protects internal components from atmospheric corrosion and provides locating ring for actuator mounting. Fully encapsulated bottom shaft eliminates potential leak path at bottom of valve and eliminates the necessity for further sealing elements- Design standard as per EN 593 or API 609 as standard, another applicable standard on request.
- Testing standard as per API 598 or BS EN 12266-I as standard. 100% bubble tight shut off valve.
- Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
- Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
- Trims available with combination of various Casting material like CI/ DI/ WCB/ CF8M/ CF3M/ GR. 4A-5A/ etc. and Seat Material PTFE.
- 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
- Lever / Gear / Pneumatic / Electric Operation as per customer requirement.
C-Series- Concentric type Butterfly Valves – V-TORK CONTROLS
Butterfly Valves
V-TORK Butterfly Valves are well suited for handling larger flow of Liquids and gases alternately of low pressure and for handling of liquids with suspended solids (Slurries).
C SERIES
Specifications
- Size: 1” to 100” (40mm to 2500mm)
- Wafer, Lug, Double Flanged Ends
- Class#150, PN10
- Concentric Type
- Molded Seated / Renewable Seated
- Standard: BS 5155/ API 609/ AWWA C 504
Applications:
V-TORK Butterfly Valves are well suited for handling larger flow of liquids and gases alternately of low pressure and for handling of liquids with suspended solids (Slurries). Size 1” to 50” (25mm to 1250mm) Fabricated Valves as per customer requirement. Range of Material of Construction Disc: WCB / CF8 / CF8M / DI / CI & any special metallurgy on customer request; Stem: AISI 410 / 304 / 316; Body: CI / WCB / CF8 / CF8M Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile /PTFE/Metal Seat Range of Actuators Manual – Lever Operated, Gear Operated, Pneumatic Actuated, Motorized with Complete Automation
Canned Motor Pumps, Liquid Ammonia Pumps
Moniba is one of the most preferred Sealless Canned Motor Pump Manufacturers in India and Supplier in India. The Sealless Canned Motor Pump is a centrifugal pump which eliminates the requirement of a mechanical seal or other sealing device due to the presence of hermetically sealed electric motor mounted on single shaft ensuring no leakage.
Moniba Pumps considered as the most prominent Sealless Canned Motor Pump Manufacturers in India, uses its product abundantly in refinery and chemical plants for pumping of toxic and hazardous liquids. It is also used in pumping high temperature, high pressure services in nuclear power plant, ammonia transfer in chemical and pharmaceutical industries and many more process industries for handling expensive fluids. It can be used in industrial as well as commercial applications.
These pumps are absolutely sealed and provides a model fluid transmission even in the most demanding and difficult environment. The use of Sealless Canned Motor Pump has gained impetus recently as it ensures optimal safety for transferring toxic media leading to its increased demand in chemical and petrochemical industry.
Moniba, being the one of the best Sealless Canned Motor Pump Manufacturers in India, has to maintain the quality standards of the Motor Pumps manufactured by them. The quality of the Motor pumps stand out is their lack of wear parts which makes them almost maintenance free. The Sealless Canned Motor Pump consume extremely less power and are available in a vast variety and can be provided to the clients as per their specifications. The recent trend in the plant engineering is highly focused on world scale plants. Such mega scale productions allow efficient and Cost- optimized fabrications.
Moniba’s exceptional performance and its low- maintenance Sealless Canned Motor Pump is recognized on a global level. Reliability and safety are the most significant components that lead to succesful operations at Moniba and we thrive on these principles to deliver the best results to our clients. These pumps are examined properly by our highly qualified Inspection Officers to provide the clients with the best of it all.
Moniba Pumps has been a benchmark in the country when it comes to manufacturing and supplying best quality of Sealless Canned Motor Pumps. We have thus, been a succesful Sealless Canned Motor Pump Exporter in India in the industry. Supplying the best quality of Sealless Canned Motor Pumps is our motto and we head to strive and spread our word in the entire globe.
Moniba Pumps is one of the most renowned Liquid Ammonia Pumps Manufacturer in India, Supplier and Exporter in India. Our Liquid ammonia Pumps have been fabricated from the best quality of metals specially designed to perform adequately even in the hardest working conditions. Moniba pumps offer a complete collection of high grade ammonia pumps for the vast industry. The ammonia pumps are intricately designed for effective transfer and re-circulation of ammonia gas. We, being a Liquid Ammonia Pumps Manufacturer, produce the products with extremely high durability and are absolutely leak proof. They are also highly resistant to abrasion.
The Liquid Ammonia Pumpsare built with fully compatible graded cast iron body with versatile impeller shaft. Our pump casing and the internal components can either be carbon steel or stainless steel depending upon the process requirements. We are considered one of a kind in the category of Liquid Ammonia Pumps Manufacturer in India as the liquid Ammonia pumps manufactured by us has a very rugged and conducive design which enables its smooth and noise-free running.
The Liquid Ammonia Pumps generate exceedingly high differential pressure at low NPSH along with auto control capabilities. Our pumps can work in temperature as low as -120 deg C. Along with various material configuration options, the Liquid Ammonia Pumps will fit well into a large array of applications.
The Liquid Ammonia Pumps can be used in various refrigeration plants, ice plants, cold storages, sea food industries, frozen food processing plant and in many other industries.The Liquid Ammonia Pumps can also be customized to fulfil the clients requirements whilst keeping in mind the industry standards.
Moniba Pumps is one of the leading and valuable Liquid Ammonia Pumps Manufacturer in India which offer all variety of pumps to their clients at a very rational rate given all its extraordinary qualities. The products are thoroughly examined by the Inspection Team on various parameters before being provided to the clients.
We also aim in spreading our products outside the boundaries of the nation and become a successful Liquid Ammonia Pumps Exporter in India. We wish to successfully administer the exporting business and spread across the globe to provide quality Ammonia Pumps world-wide. All our clients are precious to us and we wish to increase our business to encourage quality products and manufacturing system to the whole world.
About Sealless Canned Motor Pumps
- Canned Motor Pump is a combination of a centrifugal pump and an induction motor presented as an integral unit. In the canned motor Configuration the motor is mounted directly on the same shaft as the impeller.
- Canned pumps are of simple design and construction, having very few parts and only two rotating parts-rotor and the impeller.
- Secondary sealing is restricted to a couple of static gasket, which are again well confined.
- Canned pumps do not required any external lubrication.
- Canned pump is seal less and auxiliary support arrangements for cooling seals are not required.
- Bush Bearings made out of carbon graphite and silicon carbide are the only parts that come up for replacement and the bearing have a very long life since there is no load on bearings, because of automatic thrust balancing, inherent in the design.
- Canned pumps runs with negligible vibrations (<10 microns) and thereby wear and tear is greatly diminished.
- Maintenance and operational cost are negligible compared to conventional pump.
- CANNED PUMPS NEVER LEAK – on continuous or intermittent pumping or even in case of pump failure.
- MONIBA PUMPS are certified FLAME PROOF/EXPLOSION PROOF (EEx-d IIB T6 (Ex) ds.).
- Conform to AP1685, 1st edition for petroleum application.
- Approved by leading consultancy in India.
- Catering to wide range of service & duty conditions.
- Available in all possible verity of construction.
FEATURES AND BENEFITS:-
Features
- No mechanical seal or its API systems
- No coupling
- No external lubrication
- Vacuum light
- Hermetically sealed with Secondary fluid Containment.
- No rigid foundation.
- Compact- saves 40%space.
- Flame proof and explosion Proof.
Benefits
- Zero emission
- No alignment
- No product loss
- Longest MTBF
- Low vibration and noise level
- Negligible maintenance
- Lowest cost of operation
Accessories
| SR.NO | PART NAME | QTY. |
| 1 | CASING | 01 |
| 2 | IMPELLER | 01 |
| 3 | FRONT BEARING HOUSING | 01 |
| 4 | ADAPTER | 01 |
| 5 | END BELL PLATE | 02 |
| 6 | STATOR BODY | 01 |
| 7 | BEARING | 02 |
| 8 | SLEEVE | 02 |
| 9 | THRUST WASHER | 02 |
| 10 | ROTOR SHAFT | 01 |
| 11 | CANNED ROTATOR | 01 |
| 12 | CANNED STATOR | 01 |
| 13 | STATOR WITH WINDING | 01 |
| 14 | SUPPORT SLEEVE | 02 |
| 15 | REAR BEARING HOUSING | 01 |
| 16 | O RING | 03 |
| 17 | GASKET | 01 |
| 18 | TERMINAL PLATE | 01 |
| 19 | TERMINAL BOX | 01 |
| 20 | TERMINAL COVER | 01 |
| 21 | BEARING MONITOR | 01 |
| 22 | WEAR NUT | 01 |
| 23 | TERMINAL PLATE GASKET | 02 |
| 24 | BASE FRAME | 01 |
| 25 | FASTENERS | - |
Cast Ball Valve
Product Description
| Size | 5/8" to 4” (15mm to 100mm) |
| Pressure Rating | ASME 150# |
| Design Standard | BS EN ISO 17292 |
| Test (Inspection) Standard | ISO 5208 / API 598 |
| Closer Member | SOLID / HOLLOW BALL |
| Construction | 2 PIECE / 3 PIECE SOFT SEATED |
| End Connection | Flanged as per 150# |
| Operation | Lever |
| Material | WCB, CF8, CF8M |
Cast Check Valve
Product Description
| Size | 1-1/2" to 12” (40mm to 300mm) |
| Pressure Rating | ASME 150# |
| Design Standard | BS 1868 |
| Pressure / Temp. | ASME B 16.34 |
| Test (Inspection) Standard | BS EN 12266 – 1 |
| Construction | Bolted Bonnet |
| End Connection | Flanged |
| Operation | |
| Material | WCB, LCB, CF8, CF8M, CF3, CF3M, CG8M, CF8C, C5, C12, WC6, WC9, C12A, 4A, 5A, 6A, Inconel, Monel, CN7M, Nickel Aluminium Bronze |
Cast Gate Valve
Product Description
| Size | 1-1/2" to 12” (40mm to 300mm) |
| Pressure Rating | ASME 150# |
| Design Standard | API 600 |
| Pressure / Temp. | ASME B 16.34 |
| Testing Std. | API 598 |
| Construction | Bolted Bonnet |
| End Connection | Flanged |
| Operation | Hand Wheel |
| Material | WCB, LCB, CF8, CF8M, CF3, CF3M, CG8M, CF8C, C5, C12, WC6, WC9, C12A, 4A, 5A, 6A, Inconel, Monel, CN7M, Nickel Aluminium Bronze |
Cast Globe Valve
Product Description
| Size | 1-1/2" to 12” (40mm to 300mm) |
| Pressure Rating | ASME 150# |
| Design Standard | BS 1875 |
| Pressure / Temp. | ASME B 16.34 |
| Test (Inspection) Standard | BS EN 12266 – 1 |
| Construction | Bolted Bonnet |
| End Connection | Flanged |
| Operation | Hand Wheel |
| Material | WCB, LCB, CF8, CF8M, CF3, CF3M, CG8M, CF8C, C5, C12, WC6, WC9, C12A, 4A, 5A, 6A, Inconel, Monel, CN7M, Nickel Aluminium Bronze |
