Showing 1–12 of 131 resultsSorted by latest
F-Series- Floating Ball Valves – V-TORK CONTROLS
F SERIES
Ball Valves are quarter turn – straight through valves, got its name from the ball that rotates to open & close the valve. Ball valves are widely used in applications where tight shut off is required. V-TORK manufactures Ball valves of 5 different types which are able to transfer gases, liquids & air. The Main advantages are the superior ease of operation, Low purchase & maintenance cost, rugged construction and longer service life.Specifications
- 2 Way
- Size ½” to 8” Class#150, 300 (Soft seated)
- Size ½” to 12” Class#150 (Metal Seated)
- Flanged Ends / Butt Welded
- Standard: BS 5351 / ISO 17292
Applications:
Range of Seat Materials PTFE/ CFT/GFT/PEEK/ Metal seat. Range of Material of Construction WCB / LCB / A105 / CF8 / CF8M / F304 / F316 / CF3 / CF3M / CD4MCU / CN7M & any special metallurgy on customer request. Range of Actuators Manual – Lever Operated, Gear Operated, Pneumatic Actuated, Motorized with Complete Automation
S-Series -Ball Valves Screwed End – V-TORK CONTROLS
Ball Valves are quarter turn — straight through valves, got its name from the ball that rotates to open & close the valve. Ball valves are widely used in applications where tight shut off is required. V-TORK manufactures Ball valves of 5 different types which are able to transfer gases, Liquids & air. The Main advantages are the superior ease of operation, Low purchase & maintenance cost, rugged construction and longer service life.
S SERIES
Specifications
- 2 Way
- Screwed, But Welded, Socketed
- Size ½” to 2” (15mm to 50mm)
- Class#150, 300, 600, 800
- Metal Seated/ Soft Seated
- Standard: BS 5351 / ISO 17292
3X-Series- Triple eccentric high performance Butterfly Valves – V-TORK CONTROLS
3X SERIES
V-TORK Butterfly Valves are well suited for handling larger flow of liquids and gases alternately of low pressure and for handling of liquids with suspended solids (Slurries).Specifications
- Size: 2” to 50” (40mm to 1200mm)
- Wafer, Lug, Flanged End
- Class #150.
- Double Tripple Type
- Standard: BS 5155
Fabricated Valves as per customer requirement.
Applications:
Range of Material of Construction Disc: WCB / CF8 / CF8M / DI / CI & any special metallurgy on customer request; Stem: AISI 410 / 304 / 316; Body: CI / WCB / CF8 / CF8M Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile /PTFE/Metal Seat Range of Actuators Manual – Lever Operated, Gear Operated, Pneumatic Actuated, Motorized with Complete Automation
2X-Series- Double eccentric high performance butterfly valves – V-TORK CONTROLS
Butterfly Valves
V-TORK Butterfly Valves are well suited for handling larger flow of Liquids and gases alternately of low pressure and for handling of liquids with suspended solids (Slurries).
2X SERIES
Specifications
- Size: 2” to 50” (40mm to 1200mm)
- Wafer, Lug, Flanged End
- Class #150.
- Double Eccentric Type
- Standard: BS 5155
Fabricated Valves as per customer requirement.
Applications:
Range of Material of Construction Disc: WCB / CF8 / CF8M / DI / CI & any special metallurgy on customer request; Stem: AISI 410 / 304 / 316; Body: CI / WCB / CF8 / CF8M Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile /PTFE /Metal Seat Range of Actuators Manual – Lever Operated, Gear Operated, Pneumatic Actuated, Motorized with Complete Automation
C-Series- Concentric type Butterfly Valves – V-TORK CONTROLS
Butterfly Valves
V-TORK Butterfly Valves are well suited for handling larger flow of Liquids and gases alternately of low pressure and for handling of liquids with suspended solids (Slurries).
C SERIES
Specifications
- Size: 1” to 100” (40mm to 2500mm)
- Wafer, Lug, Double Flanged Ends
- Class#150, PN10
- Concentric Type
- Molded Seated / Renewable Seated
- Standard: BS 5155/ API 609/ AWWA C 504
Applications:
V-TORK Butterfly Valves are well suited for handling larger flow of liquids and gases alternately of low pressure and for handling of liquids with suspended solids (Slurries). Size 1” to 50” (25mm to 1250mm) Fabricated Valves as per customer requirement. Range of Material of Construction Disc: WCB / CF8 / CF8M / DI / CI & any special metallurgy on customer request; Stem: AISI 410 / 304 / 316; Body: CI / WCB / CF8 / CF8M Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile /PTFE/Metal Seat Range of Actuators Manual – Lever Operated, Gear Operated, Pneumatic Actuated, Motorized with Complete Automation
U-403- Uni-Directional, Flanged Type Bonnetted/ Bonnet Less Knife gate valves – V-TORK CONTROLS
U-403
Awwa Knife Gate Valves
V-TORK AWWA/water Knife Gate valve standard describes Bonneted / Bonnetless and one piece/two piece construction which is made of stainless steel /cast iron /ductile iron body with resilient or metal seated knife gate valves. Theses AWWA valves are especially used in water, wastewater, and sludge water systems. V-TORK Valves are specially manufactured by AWWA standard to suit critical water applications.
Specifications
- UniDirectional, Flanged Type
- Size 2” to 24” (50mm to 600mm)
- Bonneted / Bonnet Less
- Metal Seated / Soft Seated
- 150 ICWP
- Standard: MSS SP-81
Applications
Water & Waste Water Treatment Plants, Paper, Mining, Power, Hydro Dams (Higher Size), Water Sludge, Treated Water, Service raw water, Sewerage, Thickened Sludge. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories & Addl. Features Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, V-Port for Throttling, Purging Arrangement, Accumulator for Emergency Shut Off, Wear Rings, Deflection Cones, Nitride hardening
B-810 –High performance Bi-Directional flanged Type Slurry valve – V-TORK CONTROLS
B-810
Slurry Knife Gate Valves
V-TORK slurry Knife Gate valves are designed for heavy duty purposes to isolate flow, even in the most demanding process conditions. The complete valve is built around an ease of maintenance concept which contains Purge port, Replaceable Retainer ring, Dual Elastomer Seals for long operational period. These Soft Seated Knife Gate Valve features a unique design that provides bubble-tight shutoff in either direction. The valve is designed for isolation and on/off applications in the paper, chemical, mining, power and waste water industries. It is designed to handle clean, dirt, viscous and corrosive Liquids, sludge, fibrous slurries, clean and corrosive gases.
Specifications
- Bi Directional, Lug Type
- Size 2” to 36” (50mm to 900mm)
- Dual Elastomer Seals with Retainer Rings
- Single Piece Construction
- 740 psi CWP/51 bar/Class #300
- Standard: V-TORK Std.
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves Range of Addl. Features Deflection cone, V-Orifice, Purge Port, Stem Extension, Fail Safe System, Locking Arrangement, Renewable seats, Non raising Stem arrangement.
B-720 – Bi-Directional flanged Type Slurry valve (Long face to face) – V-TORK CONTROLS
B-720
Slurry Knife Gate Valves
V-TORK slurry Knife Gate valves are designed for heavy duty purposes to isolate flow, even in the most demanding process conditions. The complete valve is built around an ease of maintenance concept which contains Purge port, Replaceable Retainer ring, Dual Elastomer Seals for long operational period. These Soft Seated Knife Gate Valve features a unique design that provides bubble-tight shutoff in either direction. The valve is designed for isolation and on/off applications in the paper, chemical, mining, power and waste water industries. It is designed to handle clean, dirt, viscous and corrosive Liquids, sludge, fibrous slurries, clean and corrosive gases.
Specifications
- Bi Directional, Flanged Type
- Size 2” to 64” (50mm to 1600mm)
- Dual Elastomer Seals
- Single Piece Construction
- 2” to 30” 150 PSI CWP/ Above 30” 100 PSI
- Standard: V-TORK Std
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction DI & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves, Reed Limit Switch. Range of Addl. Features Purge Port, Drain Port, Stem Extension, Fail Safe System, Locking Arrangement, Non raising Stem arrangement.
B-540 – Bi-Directional Lug Type Slurry valve (Short face to face) – V-TORK CONTROLS
B-540
Slurry Knife Gate Valves
V-TORK slurry Knife Gate valves are designed for heavy duty purposes to isolate flow, even in the most demanding process conditions. The complete valve is built around an ease of maintenance concept which contains Purge port, Replaceable Retainer ring, Dual Elastomer Seals for long operational period. These Soft Seated Knife Gate Valve features a unique design that provides bubble-tight shutoff in either direction. The valve is designed for isolation and on/off applications in the paper, chemical, mining, power and waste water industries. It is designed to handle clean, dirt, viscous and corrosive Liquids, sludge, fibrous slurries, clean and corrosive gases.
Specifications
- Bi Directional, Lug Type
- Size 2” to 54” (50mm to 1350mm)
- Dual Elastomer Seals with Retainer Rings
- Single Piece Construction
- 150 PSI/300 PSI (18” to 54”) CWP
- Standard: V-TORK Std
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction DI / WCB & Special Materials on Request Range of Seat Materials EPDM /Natural Rubber (Special material on request) Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves, Reed Limit Switch. Range of Addl. Features Purge Port, Drain Port, Stem Extension, Fail Safe System, Locking Arrangement, Non-Raising Stem arrangement…
B-360 – Bi-Directional Two Piece type Knife gate valves – V-TORK CONTROLS
B-360
Slurry Knife Gate Valves
V-TORK slurry Knife Gate valves are designed for heavy duty purposes to isolate flow, even in the most demanding process conditions. The complete valve is built around an ease of maintenance concept which contains Purge port, Replaceable Retainer ring, Dual Elastomer Seals for long operational period. These Soft Seated Knife Gate Valve features a unique design that provides bubble-tight shutoff in either direction. The valve is designed for isolation and on/off applications in the paper, chemical, mining, power and waste water industries. It is designed to handle clean, dirt, viscous and corrosive Liquids, sludge, fibrous slurries, clean and corrosive gases.
Specifications
- Bi Directional, Flanged Type
- Size 2” to 40” (50mm to 1000mm)
- Resilient Seated (U-Seal)
- Two Piece Fabricated Construction
- 150 PSI CWP
- Standard: MSS SP-81, MSS SP-148, MSS SP-151
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves Range of Addl. Features Deflection cone, V-Orifice, Purge Port, Stem Extension, Fail Safe System, Locking Arrangement, Renewable seats, Non raising Stem arrangement.
B-630 – Bi-Directional O Port Knife gate valves – V-TORK CONTROLS
B-630
Slurry Knife Gate Valves
V-TORK slurry Knife Gate valves are designed for heavy duty purposes to isolate flow, even in the most demanding process conditions. The complete valve is built around an ease of maintenance concept which contains Purge port, Replaceable Retainer ring, Dual Elastomer Seals for long operational period. These Soft Seated Knife Gate Valve features a unique design that provides bubble-tight shutoff in either direction. The valve is designed for isolation and on/off applications in the paper, chemical, mining, power and waste water industries. It is designed to handle clean, dirt, viscous and corrosive Liquids, sludge, fibrous slurries, clean and corrosive gases.
Specifications
- Bi Directional, Lug Type
- Size 4” to 24” (100mm to 600mm)
- Metal Seated / Resilient Seated
- Split Body Construction
- 150 PSI CWP
- Standard: MSS SP-81, MSS SP-148, MSS SP-151
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves Range of Addl. Features Deflection cone, V-Orifice, Purge Port, Stem Extension, Fail Safe System, Locking Arrangement, Renewable seats, Non raising Stem arrangement.
B-900 – Bi Directional, Two piece Rugged Knife Gate Valve – V-TORK CONTROLS
B-900
Specifications
- Size Range: 2” to 40” (50MM to 1000MM)
- Pressure Rating: 2”- 40” - 150 PSI CWP
- Flow Direction can be mounted in both flow directions
