Showing 13–21 of 21 results
F-Series- Floating Ball Valves – V-TORK CONTROLS
F SERIES
Ball Valves are quarter turn – straight through valves, got its name from the ball that rotates to open & close the valve. Ball valves are widely used in applications where tight shut off is required. V-TORK manufactures Ball valves of 5 different types which are able to transfer gases, liquids & air. The Main advantages are the superior ease of operation, Low purchase & maintenance cost, rugged construction and longer service life.Specifications
- 2 Way
- Size ½” to 8” Class#150, 300 (Soft seated)
- Size ½” to 12” Class#150 (Metal Seated)
- Flanged Ends / Butt Welded
- Standard: BS 5351 / ISO 17292
Applications:
Range of Seat Materials PTFE/ CFT/GFT/PEEK/ Metal seat. Range of Material of Construction WCB / LCB / A105 / CF8 / CF8M / F304 / F316 / CF3 / CF3M / CD4MCU / CN7M & any special metallurgy on customer request. Range of Actuators Manual – Lever Operated, Gear Operated, Pneumatic Actuated, Motorized with Complete Automation
S-Series -Ball Valves Screwed End – V-TORK CONTROLS
Ball Valves are quarter turn — straight through valves, got its name from the ball that rotates to open & close the valve. Ball valves are widely used in applications where tight shut off is required. V-TORK manufactures Ball valves of 5 different types which are able to transfer gases, Liquids & air. The Main advantages are the superior ease of operation, Low purchase & maintenance cost, rugged construction and longer service life.
S SERIES
Specifications
- 2 Way
- Screwed, But Welded, Socketed
- Size ½” to 2” (15mm to 50mm)
- Class#150, 300, 600, 800
- Metal Seated/ Soft Seated
- Standard: BS 5351 / ISO 17292
U-106- Uni-Directional, Wafer type Bonnetted Knife gate valves – V-TORK CONTROLS
U-106 AWWA
Awwa Knife Gate Valves
V-TORK AWWA/water Knife Gate valve standard describes Bonneted / Bonnetless and one piece/two piece construction which is made of stainless steel /cast iron /ductile iron body with resilient or metal seated knife gate valves. Theses AWWA valves are especially used in water, wastewater, and sludge water systems. V-TORK Valves are specially manufactured by AWWA standard to suit critical water applications.Specifications
- UniDirectional, Wafer Type
- Size 2” to 120” (50mm to 3400mm)
- Bonneted / Bonnet Less
- Metal Seated / Soft Seated
- 150 PSI CWP
- Standard: AWWA C520-10
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves Range of Addl. Features Deflection cone, V-Orifice, Purge Port, Stem Extension, Fail Safe System, Locking Arrangement, Renewable seats, Non raising Stem arrangement.
U-160 – Uni-Directional Wafer type Knife gate valves – V-TORK CONTROLS
U-160
General Knife Gate Valves
V-TORK General Knife Gate Valves are specially designed and manufactured according to MSS SP/Customized to meet the worst working conditions in Pulp & Paper, Mining & Steel, Power & Chemical Industries, Water Treatment Industries to handle Semi-Solids, Abrasive Slurries, Dry-Ash, Chips, Fiber contents Pulps etc. The compact design of the valves facilitates light weight, minimum space for installing, easy operation and maintenance. The compact Knife Edged gate is manufactured from Stainless Steel Plates of various grades irrespective of Body material. The bottom of the Gate is having Knife type edge which can cut through Semi-Solid or Paste type Pulp with possible fiber and solid contents, Fly ash, Chemicals with solid contents and ensure smooth shutdown operation and tight shut-off. The Knife gate valves are available in wide range of material. Trim options are available to suit individual requirements for various working.
Specifications
- Uni Directional, Wafer Type
- Size 2” to 120” (50mm to 3000mm)
- Metal Seated / Resilient Seated
- Single Piece Construction
- 150 PSI CWP
- Standard: MSS SP-81, MSS SP-148, MSS SP-151
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ Metal Seat Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves Range of Addl. Features Deflection cone, V-Orifice, Purge Port, Stem Extension, Fail Safe System, Locking Arrangement, Renewable seats, Non raising Stem arrangement.
U-205- Uni-Directional, Lug type Bonnetted Knife gate valves – V-TORK CONTROLS
U - 205 AWWA
Awwa Knife Gate Valves
V-TORK AWWA/water Knife Gate valve standard describes Bonneted / Bonnetless and one piece/two piece construction which is made of stainless steel /cast iron /ductile iron body with resilient or metal seated knife gate valves. Theses AWWA valves are especially used in water, wastewater, and sludge water systems. V-TORK Valves are specially manufactured by AWWA standard to suit critical water applications.Specifications
- UniDirectional, Lug Type
- Size 2” to 120” (50mm to 3400mm)
- Bonneted / Bonnet Less
- Metal Seated / Soft Seated
- 150 PSI CWP
- Standard: AWWA C520-10
Applications
Water & Waste Water Treatment Plants, Paper, Mining, Power, Hydro Dams (Higher Size), Water Sludge, Treated Water, Service raw water, Sewerage, Thickened Sludge. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories & Addl. Features Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, V-Port for Throttling, Purging Arrangement, Accumulator for Emergency Shut Off, Wear Rings, Deflection Cones, Nitride hardening
U-250 – Uni-Directional Lug type Knife gate valves – V-TORK CONTROLS
U-250
General Knife Gate Valves
V-TORK General Knife Gate Valves are specially designed and manufactured according to MSS SP/Customized to meet the worst working conditions in Pulp & Paper, Mining & Steel, Power & Chemical Industries, Water Treatment Industries to handle Semi-Solids, Abrasive Slurries, Dry-Ash, Chips, Fiber contents Pulps etc. The compact design of the valves facilitates light weight, minimum space for installing, easy operation and maintenance. The compact Knife Edged gate is manufactured from Stainless Steel Plates of various grades irrespective of Body material. The bottom of the Gate is having Knife type edge which can cut through Semi-Solid or Paste type Pulp with possible fiber and solid contents, Fly ash, Chemicals with solid contents and ensure smooth shutdown operation and tight shut-off. The Knife gate valves are available in wide range of material. Trim options are available to suit individual requirements for various working.
Specifications
- Uni Directional, Lug Type
- Size 2” to 120” (50mm to 3000mm)
- Metal Seated / Resilient Seated
- Single Piece Construction
- 150 PSI CWP
- Standard: MSS SP-81, MSS SP-148, MSS SP-151
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves Range of Addl. Features Deflection cone, V-Orifice, Purge Port, Stem Extension, Fail Safe System, Locking Arrangement, Renewable seats, Non raising Stem arrangement.
U-304- Uni-Directional, Flanged type Bonnetted Knife gate valves – V-TORK CONTROLS
U -304 AWWA
Awwa Knife Gate Valves
V-TORK AWWA/water Knife Gate valve standard describes Bonneted / Bonnetless and one piece/two piece construction which is made of stainless steel /cast iron /ductile iron body with resilient or metal seated knife gate valves. Theses AWWA valves are especially used in water, wastewater, and sludge water systems. V-TORK Valves are specially manufactured by AWWA standard to suit critical water applications.Specifications
- UniDirectional, Flanged Type
- Size 2” to 120” (50mm to 3400mm)
- Bonneted / Bonnet Less
- Metal Seated / Soft Seated
- 150 PSI CWP
- Standard: AWWA C520-10
Applications
Water & Waste Water Treatment Plants, Paper, Mining, Power, Hydro Dams (Higher Size), Water Sludge, Treated Water, Service raw water, Sewerage, Thickened Sludge. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories & Addl. Features Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, V-Port for Throttling, Purging Arrangement, Accumulator for Emergency Shut Off, Wear Rings, Deflection Cones, Nitride hardening
U-340 – Uni-Directional Flanged type Knife gate valves – V-TORK CONTROLS
Specifications
- Uni Directional, Flanged Type
- Size 2” to 120” (50mm to 3000mm)
- Metal Seated / Resilient Seated
- Single Piece Construction
- 150 PSI CWP
- Standard: MSS SP-81, MSS SP-148, MSS SP-151
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves Range of Addl. Features Deflection cone, V-Orifice, Purge Port, Stem Extension, Fail Safe System, Locking Arrangement, Renewable seats, Non raising Stem arrangement.
U-403- Uni-Directional, Flanged Type Bonnetted/ Bonnet Less Knife gate valves – V-TORK CONTROLS
U-403
Awwa Knife Gate Valves
V-TORK AWWA/water Knife Gate valve standard describes Bonneted / Bonnetless and one piece/two piece construction which is made of stainless steel /cast iron /ductile iron body with resilient or metal seated knife gate valves. Theses AWWA valves are especially used in water, wastewater, and sludge water systems. V-TORK Valves are specially manufactured by AWWA standard to suit critical water applications.
Specifications
- UniDirectional, Flanged Type
- Size 2” to 24” (50mm to 600mm)
- Bonneted / Bonnet Less
- Metal Seated / Soft Seated
- 150 ICWP
- Standard: MSS SP-81
