Showing all 5 results
Adept Electromagnetic Flowmete – MagBP 6440
Battery Powered
Introduction
Adept MagBP 6440 Full Bore Electromagnetic Flowmeter is a battery Powered Electromagnetic Flowmeter. It is mostly used in the applications where Electric Supply is not available and accurate Flow measurement is essential. The battery powers the Flowmeter for minimum 5 years. AMR Facility like GSM or GPRS is available in the Model. We offer Water Flow Meters with high accuracy rate. Suitable for all types of conductive fluids and water and waste water applications. Measure the rate of flow of slurries or conducting liquids flowing in closed pipes.
Salient Features
Based on Faraday’s law of electromagnetic inductionFlow tube sizes 10 mm to 600 mmIntegral or remote transmitterAbsolute zero stability and noise elimination due pulsed DC excitationHigh linearity due to characteristic magnetic fieldHigh long term stability and reliabilityField interchangeable electronicsCoil assembly in hermetically sealed welded constructionApplications
Chemical, petrochemical and process industriesPharmaceutical industriesSugar, beverage industriesWater and waste water managementMining industriesFertilizers industriesFood and drug industriesPaper and pulp industriesDredging industriesProduct Selection Guide
Adept Electromagnetic Flowmete – MagFlow 6415
Inline Mains Operated
Introduction
Electromagnetic Flowmeters are based on Faraday’s Law of Electromagnetic Induction.
In an Electromagnetic Flowmeter, the magnetic field is generated by a set of coils. As the conductive liquid passes through the electromagnetic field, an electric voltage is induced in the liquid which is directly proportional to its velocity. This induced voltage is perpendicular to both, the liquid flow direction and the electromagnetic field direction. The voltage sensed by the electrodes is further processed by the transmitter to give standardised output signal or displayed in appropriate engineering unit.
The flux density of the electromagnetic field in a given Flowmeter and the distance between the electrodes are constant. Therefore, the induced voltage is only a function of liquid velocity.
Based on Faraday’s law of electromagnetic induction
Coil assembly in hermetically sealed welded construction
High linearity due to characteristic magnetic field
High long-term stability and reliability
Flow tube sizes 10 mm to 2000 mm and above
Integral or remote transmitter
Field interchangeable electronics
Absolute zero stability and noise elimination due pulsed DC excitation
Chemical, petrochemical and process industries
Food and drug industries
Paper and pulp industries
Dredging industries
Fertilizers industries
Pharmaceutical industries
Sugar, beverage industries
Water and waste water management
Mining industries
Salient Features
Based on Faraday’s law of electromagnetic induction Coil assembly in hermetically sealed welded construction High linearity due to characteristic magnetic field High long-term stability and reliability Flow tube sizes 10 mm to 2000 mm and above Integral or remote transmitter Field interchangeable electronics Absolute zero stability and noise elimination due pulsed DC excitationApplications
Chemical, petrochemical and process industries Food and drug industries Paper and pulp industriesDredging industries Fertilizers industries Pharmaceutical industries Sugar, beverage industries Water and waste water management Mining industriesProduct Selection Guide
Adept Electromagnetic Flowmete – EcoMag 6420
Plastic Body
Introduction
Adept introduces a new range of Plastic Body ‘EcoMag 6420’ Electromagnetic Flowmeters for the first time in India. These Flowmeters will help you reduce your cost and at the same time, giving performance at par with metallic body Flowmeters. It is suitable for pipes with diameters of 10 mm to 200 mm.
The meter features flanged construction. It has excellent accuracy and flow rangeability. The meter is suitable for use on a wide range of corrosive and aggressive range of conductive liquids.
Salient Features
Entire plastic body construction, therefore rust freeSuitable for virtually all types of conductive liquidsRemote transmitter type assemblySuitable for pipe sizes of diameters 10 mm to 200 mmNo pressure lossLight weightEasy installation and absolutely low maintenanceCoil assembly in hermetically sealed welded constructionField interchangeable electronicsExcellent accuracy and repeatabilityApplications
Chemical, petrochemical and process industriesPharmaceutical industriesSugar, beverage industriesWater and waste water managementMining industriesFertilizers industriesFood and drug industriesPaper and pulp industriesDredging industriesProduct Selection Guide
Adept Electromagnetic Flowmeter – MagProbe 6450
Insertion Type
Introduction
Electromagnetic Flow measurement has been in use around the world for 50 years and more, as witnessed by the popularity of these meters that continues unabated in virtually all sectors of industry. Electromagnetic Flowmeters can be used to measure all electrically conductive liquids (> 5 µS/cm) with or without solids, e.g. water, wastewater, sludge, slurries, pastes, acids, alkalis, juices, fruit pulp, etc.
Insertion Type Electromagnetic Flowmeter is suitable for the most demanding applications. They are based on Faraday’s law of Electromagnetic Induction. The meter features sensor tube and ball valve assembly.
Salient Features
Based on Faraday’s law of electromagnetic inductionCoil assembly in hermetically sealed welded constructionField interchangeable electronicsAbsolute zero stability and noise elimination due pulsed DC excitationFlow tube sizes 100 mm to 600 mmIntegral or remote transmitterHigh linearity due to characteristic magnetic fieldHigh long-term stability and reliabilityApplications
Chemical, petrochemical and process industriesPharmaceutical industriesFertilizers industriesSugar, beverage industriesProduct Selection Guide
Adept Electromagnetic Flowmeter MagFlow 6410
Inline Mains Operated
Introduction
Electromagnetic flow measurement has been in use around the world for 50 years and more, as witnessed by the popularity of these meters that continues unabated in virtually all sectors of industry. Electromagnetic Flowmeters can be used to measure all electrically conductive liquids (> 20 µS/cm) with or without solids, e.g. water, wastewater, sludge, slurries, pastes, acids, alkalis, juices, fruit pulp, etc.
Adept MagFlow 6410 Full Bore Electromagnetic Flowmeter is suitable for the most demanding applications. It is based on Faraday’s law of Electromagnetic Induction. The meter features flanged construction and is available with choice of liner and electrode material. All meters consist of a sensor and a converter that may be mounted either integral to the sensor or remotely with a field mount kit. Adept Flowmeters are calibrated at our own Water Flow Calibration Facility. It uses the primary method of measuring the water flow by gravimetric principle. The facility is designed for calibration of flowmeters under controlled and stable flow conditions.
Salient Features
Based on Faraday’s law of electromagnetic inductionCoil assembly in hermetically sealed welded constructionHigh linearity due to characteristic magnetic fieldHigh long-term stability and reliabilityFlow tube sizes 10 mm to 3000 mm and aboveIntegral or remote transmitterField interchangeable electronicsAbsolute zero stability and noise elimination due pulsed DC excitationApplications
Chemical, petrochemical and process industriesFood and drug industriesPaper and pulp industriesDredging industriesFertilizers industriesPharmaceutical industriesSugar, beverage industriesWater and waste water managementMining industries