Belimo Fire Damper Actuators
Applications
Specifically designed safety actuators for the motorisation of fire dampers provide best protection against the spread of fire and smoke through the air ducts.
Technology that Saves Lives
Belimo fire and smoke damper actuators are designed for operation in smoke and combination fire and smoke dampers in ventilation and air-conditioning systems with a torque range from 2 Nm to 40 Nm @ 177°C. For maximum safety in all situations, the fire and smoke actuators meet all codes for commercial buildings in the U.S., pass UL 555 and UL 555S at 177ºC and are tested for 30,000 open-closed cycles with approved dampers. Belimo fire and smoke damper actuators exceed UL’s requirement of 20,000 cycles at damper static load.
Safety in Buildings
Belimo fire and smoke damper actuators have an extensive torque range specifically designed for operation with fire, smoke, and combination fire and smoke dampers in ventilation and air-conditioning systems. As an integral part of the life safety system, Belimo fire and smoke actuators provide high performance, low power consumption, and are compliant with Life Safety Codes and Standards.
Specification
Torque (Nm): 2 Nm, 3.5 Nm, 4 Nm, 8 Nm, 9 Nm, 18 Nm, 20 Nm
Voltage AC/DC: 120 V, 230 V, 24 V
Control type: Open/close, Modulating
Electrical connection: Cable, Cable with connector plug,Leads
Thermoelectric tripping device: BAT (72°C)
Consulting Engineers
Your analytical skillset makes you an invaluable asset to your organisation. Though your job is to design systems and operating sequences that meet energy codes to make facilities run more efficiently, you constantly find yourself collecting information and analysing data when it could be spent looking for new and innovative ways to save energy and improve building performance. Belimo ball valves provide:
- Models available with tight close-off up to 1000 psi to ensure dependable operation
- Spring return, non fail-safe, and electronic fail-safe actuator to drive the valve open or closed during power failure to meet sequence requirements
- NEMA 4 actuator options for harsh outdoor applications
- High Kvs full port ball valves for isolation applications
- Customer focused organisation with support documentation requirements for plans and specifications
Contractors & Distributors
- Easy selection, installation, and hassle-free service
- Models with tight close-off up to 1400 kPa to ensure dependable operation
- Range of media temperature ratings suited for steam, chilled and hot water applications
- Assembled with rotary actuators offering easy field assembly and installation saving you time
- Fast delivery with extensive support
Building Owners
Building expansion and tenant improvements are a constant challenge to your facility department and the value of your property. You are having difficulty keeping clients comfortable, identifying ways to optimise your HVAC system, and preserving capital budgets. Belimo ball valves can offer:
- High performance VB series ANSI Class I50 or 300 carbon steel bodies which are ideal for aggressive applications
- 0% leakage or ANSI Class VI rating increasing plant Delta T efficiency and building comfort
- Serviceable trim components on VS and VSS series valves reducing replacement cost
- High Kvs ball valves with minimal pressure drop, which are ideal for isolation application where pumping costs are high
- NEMA 4 actuator options for harsh outdoor applications which assure long service life
Facility Managers
Higher energy prices combined with costly building inefficiencies are making your job more and more difficult to perform. While you should be looking for new and innovative ways to reduce energy consumption and improve facility performance, you’re simply too busy dealing with employees, troubleshooting technical issues, and trying to combat costly problems with more money. Belimo ball valves can provide:
- Excellent control stability maintaining occupant comfort level
- Better control to prevent “hunting” of the control loop, increasing life span of actuator and valve
- Models available with tight close-off up to 1400 kPa to ensure dependable operation
- Easy selection, installation, and service for improvement projects or retrofits
- Fast delivery and online technical support
ESCO
You are tasked with communicating to organisations how they can save energy and improve performance — but key opportunities are passing you by. Why? Most of your time is spent searching for new product innovations that are backed by proven and reliable energy savings data. Belimo ball valves offer:
- ANSI Class VI or 0% leakage rating offering increased plant Delta T efficiency and building comfort
- Tight close-off up to 1400 kPa to provide dependable performance
- Actuator to utilise full control signal for maximum resolution and precise control
- High Kvs ball valves with minimal pressure drop. These are ideal for isolation application where pumping costs are high
- Better control to prevent “hunting” of the control loop, increasing life span of actuator and valve
Commissioning Agents / Balancing Contractors
The responsibilities of your job are complex. Between managing and reviewing projects, along with balancing and commissioning systems, you’ve got a lot on your plate. What you’re looking for is an innovative product with proven energy savings data that meets your facility’s specifications without the hassle of a complex installation and/or costly maintenance requirements. Belimo ball valves offer:
- Manual override function to provide easy troubleshooting capabilities during start-up and commissioning
- MFT models with field selectable control and feedback signal, and running time to match design sequences and controller requirements
- Trending with Multi-Function Technology (MFT) models for system diagnosis
- Self-cleaning ball valve technology to provide superior clog resistance and ensure flow is maintained in heating and cooling systems
Related products
Belimo BTU Meter / Thermal Energy Meters (TEM)
Applications
Belimo thermal energy meters meet the requirements of EN1434 and have type approval according to MID 2014/32/EU. Types without approval are equipped with glycol compensation, who reliably measure the energy even if there is glycol in the water.
Energy billing made easier than ever
Belimo's certified Thermal Energy Meters meet the requirements of EN 1434 and have type approval in accordance with the European Measuring Instruments Directive 2014/32/EU (MID). They provide validated data for invoicing purposes, which can be used for direct tenant billing. Our Thermal Energy Meters are also available as variant without MID / EN 1434 approval. They can reliably measure energy, even when there is glycol in the water. They automatically and continuously measure the glycol content in the fluid, compensate for it and, in doing so, ensure reliable ultrasonic volumetric flow measurement. This results in precise determination of the thermal energy. Belimo Thermal Energy Meters™ are designed to be multi-application devices, i.e. they can be used as heat application, cold application, or combined heat/cold application. They can also be installed either in the return pipe or in the supply pipe of the system. The application and installation position are provided to the valve during setup using a smartphone and the Belimo Assistant App or using a laptop and the built in web-server.
High-quality measurement
Multipoint wet calibration of the thermal energy meters
The new Thermal Energy Meters integrate energy metering and IoT-enabled billing in one device. They offer seamless and direct integration to the BMS or to IoT-based monitoring platforms, with IoT-based monitoring, performance improvement tools, and billing data. Bringing together performance features to save you time and money.
Specification
Certification: MID / EN 1434, Measured values, Temperature, Flow
Flow range (m³/h): 0.015...1.5 m³/h, 0.025...2.5 m³/h, 0.035...3.5 m³/h, 0.06...6 m³/h, 0.1...10 m³/h, 0.15...15 m³/h
Pipe size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm
Display type: LCD
Belimo Electronic Pressure Independent Valves (EPIV)
Applications
Belimo's pressure independent valve technology optimises the control of variable flow systems and helps maximise energy savings.
High Performance Solutions
Belimo pressure independent valve technology maximises energy savings of variable flow pumping systems while addressing unique control challenges. Belimo offers a series of pressure independent (PI) control valves; from the PIQCV, a super compact PI valve, ePIV an electronic PI valve offering true flow measurement to the Energy Valve that optimises, documents and proves water coil performance.
Energy Efficient Valves Providing Optimal Performance
With Belimo’s pressure independent control valve technology only a single valve is required to maintain proper flow through each circuit. Each valve arrives from the factory pre-set for each circuit and can be changed in the field, so there is no additional balancing required. The system performs perfectly from start-up. Pressure independent valves are used to regulate flow through air handlers, heating and cooling coils, fan coil units, unit ventilators and VAV re-heat coils.
Specification
Product type: Valve, Valve-actuator unit
PI-Technology: Electronic, Mechanical
Pipe connection: Flange, Internal and external thread, Internal thread
Valve size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm
Fail-safe function: Non-fail-safe, Fail-safe
Voltage AC/DC: 24 V
Control type: Modulating, Communicative, Hybrid (communicative / analogue)
Running time (fail-safe): 35 s
Electrical connection: Cable
Belimo Gas Monitors (Air) | Gas monitoring devices | Multi-gas monitor
Applications
Belimo’s gas monitor devices offer an intelligent peer-to-peer communication protocol that gives users unparalleled flexibility to configure and install a complete ventilation control system with only one monitor or dozens operating in multiple ventilation zones.
Accurate and reliable gas monitoring - Indoor parking garages
Exhaust ventilation controlled by Belimo's gas monitors provides a safe, clean environment and helps to keep energy costs in line. Using carbon monoxide and nitrogen dioxide gas monitors in parking garages offers accurate and reliable exhaust ventilation control where diesel-powered vehicles may also be present. The modular design provides a combined unit with carbon monoxide and nitrogen dioxide sensors within one device, helping to reduce energy costs by measuring emissions and only exhaust-heated or air-conditioned air when needed.
Belimo Globe Valves
Applications
The Globe valve series are available in DN 15 to DN 250 with both threaded and flanged end fittings to meet the requirements of various applications, incl. high pressures and high temperatures.
Greater Force and Flexibility
The globe valve series are available in sizes from DN15 - 150 which fulfil the requirements of PN16 and PN25 applications. Utilising either bronze or stainless steel trim and fitted with either spring return, non-spring return, or electronic fail-safe actuators, globe valves are the perfect fit for HVAC equipment such as air handling units, terminal equipment, and hydronic systems with primary and secondary loops of water or steam service.
More Strength for Higher Pressure Demands
The Belimo globe valve actuators are designed to withstand the rigorous demands of many HVAC applications. With its innovative quick connect coupler, the globe valve actuator can be retrofitted and installed and adapted in no time.
Specification
Pattern: 2-way, 3-way
Valve operations mode: Diverting, Mixing, Mixing/Diverting
PN: 16, 25
kvs range (kvs): 1.1...3.0 kvs, 3.1...6.5 kvs, 6.6...14 kvs, 15...40 kvs, 41...170 kvs, 171...1000 kvs
Valve size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm, 200 mm, 250 mm
Pipe connection: Flange, Internal thread
Belimo Outdoor / Protected Damper Actuators
Applications
Belimo IP66/67 NEMA 4X actuators are particularly suitable for utilisation in outdoor applications and are protected against UV radiation, rain/snow, dirt, dust, air humidity.
Reliability and Performance
Belimo IP66 / 67 housing design combined with extensive independent testing provides a complete, unmatched protection in extreme environments. The housings are weather-tight and corrosion resistant for the harshest indoor and outdoor conditions with UV protection. For high humidity or low temperature (-40°C) applications a heater option is available. These actuators are ideal for rooftop applications, indoor swimming pools, wood drying kilns, agriculture and food industries.
Belimo's unique IP66 / 67 housing incorporates its damper actuator and valve product lines. The housing design provides complete, unmatched protection in extreme environments.
Specification
Fail-safe function: Non-fail-safe, Fail-safe
Torque: 6 Nm, 10 Nm, 16 Nm, 20 Nm, 40 Nm, 160 Nm
Voltage AC/DC: 120 V, 230 V, 24 V, 48 V, 72 V
Control type: Open/close, 3-point, Modulating, Communicative, Hybrid (communicative / analogue)
Running time: 2.5…19 s, 20…49 s, 50…79 s, 80…99 s, 100…150 s, adjustable
Running time (fail-safe): 4 s, 20 s, 30 s, 35 s
Auxiliary switches: 1x SPDT, 2x SPDT
Electrical connection: Cable: Terminals
Belimo Outdoor Sensors (Air)
Applications
Belimo's outdoor sensors for temperature and humidity have IP65 protection and provide all common active and passive output signals as well as Modbus and BACnet, depending on the version.
Providing the Reliability, You Know and Expect
Outdoor mounted sensors designed to measure the outside temperature for efficient heating/cooling automation.
Efficient Air Quality
Outdoor mounted sensors equipped with a NEMA 4X / IP65 rated enclosure, snap cover and mounting plate for ease of installation are available with passive or active outputs and are compatible to major building automation systems. Combined temperature and humidity sensors with selectable relative humidity, absolute humidity, dew point and enthalpy outputs are available with optional BACnet and Modbus communications. These sensors measure the outdoor air to permit the DDC system to coordinate with actual building conditions ensuring accurate and efficient air quality. All outdoor sensors are UL certified and backed by a 5-year warranty.
Specification
Measured values: Temperature, Humidity, Light
Output signal: 0...5 V, 0...10 V, 4...20 mA, Modbus, BACnet, Pt100, Pt1000, Ni1000, Ni1000TK5000, NTC10k (10k2), NTC10k Pre (10k3), NTC20k
Additional features: Internal sensor, External sensor
Belimo Quick Running Damper Actuators / Fast Running Actuators
Applications
Belimo Fast Running actuators (from 2.5 sec.) are available with rotary or linear movement.
Speed and Reliability
Belimo quick running damper actuators are available with rotary or linear actuators with open/close or modulating control. Field programmable types allow the running time, torque, operating range and position feedback to be optimised to the specific application. Cables, form-fits and clamps can be adapted individually upon request. Whether in room pressurisation fume hoods or VAV systems – the quick running actuators open and close air dampers fast to meet the critical needs of the system.
Versatile in Performance and Function
Whether in heating or cooling circuits, ventilation, extraction or VAV systems – the quick running actuators open and close air dampers at top speed. Quick running actuator ensures air performance in paint rooms, laboratories and other sensitive areas. Rugged motors, gearboxes and IP 54 housings guarantee a long service life even under the harsh conditions.
Specification
Movement type: Rotative, Linear
Fail-safe function: Non fail-safe, Fail-safe
Torque (Nm): 4 Nm, 6 Nm, 8 Nm, 16 Nm, 160 Nm
Force (N): 100 N
Stroke: 100 mm
Voltage AC/DC: 120 V, 230 V, 24 V, 48 V, 72 V
Control type: Open/close, 3-point, Modulating, Communicative, Hybrid (communicative / analogue)
Running time: 2.5...19 s, 20...49 s, 50...79 s, 80...99 s, 100...150 s, adjustable
Mechanical interface: Universal shaft clamp reversible, Universal shaft clamp, Form fit
Running time (fail-safe): 4 s, 30 s
Protection category: IP54, IP66/67
Belimo Room Units / Thermostate
Applications
Belimo room sensors and room operating units offer the architect an aesthetic and timeless design, the installer a quick assembly, the system integrator an easy commissioning and the end customer a comfortable indoor climate.
Belimo sensors for a healthy and comfortable room climate
The new room units (sensors and room operating units) are the perfect addition to the existing product range. With the expansion of the product range for visible areas of the room, Belimo offers architects an aesthetic and timeless design. Installers appreciate quick assembly, system integrators easy commissioning with a smartphone. End customers enjoy not only a comfortable and healthy room climate but also the intuitive operation.
Lean, timeless design.
Belimo room units impress with their aesthetic, timeless design and the shallow depth between 13 and 23 mm, depending on the sensor type. The room units can be seamlessly integrated into existing third-party controllers. They feature fast, tool-free assembly as well as high long-term measurement accuracy and short reaction times. The Belimo Assistant App enables simple commissioning of the active room sensors and their diagnosis with a smartphone. Thanks to Near Field Communication (NFC), parametrisation is possible even if the room sensor is not connected to the power supply.
Specification
Unit type: Room controller, Room operating units, Room sensor
Measured values: Temperature, Humidity, CO₂, Relative pressure, PM2.5_PM10, TVOC
Output signal: 0...5 V, 0...10 V, Modbus, BACnet, Pt1000, Ni1000, Ni1000TK5000, NTC1k8, NTC10k (10k2), NTC10k Pre (10k3), NTC20k, 2...10 V, MP-Bus
Mounting type: Wall mount, Room, Flush mount, Ceiling mount
Additional features: NFC, Manual override and setpoint, Manual override
Display type: Belimo Display App, Belimo Display App and LED, LED, Touchscreen, ePaper touch display, ePaper touch display and LED
