Belimo Gas Monitors (Air) | Gas monitoring devices | Multi-gas monitor
Applications
Belimo’s gas monitor devices offer an intelligent peer-to-peer communication protocol that gives users unparalleled flexibility to configure and install a complete ventilation control system with only one monitor or dozens operating in multiple ventilation zones.
Accurate and reliable gas monitoring – Indoor parking garages
Exhaust ventilation controlled by Belimo’s gas monitors provides a safe, clean environment and helps to keep energy costs in line. Using carbon monoxide and nitrogen dioxide gas monitors in parking garages offers accurate and reliable exhaust ventilation control where diesel-powered vehicles may also be present. The modular design provides a combined unit with carbon monoxide and nitrogen dioxide sensors within one device, helping to reduce energy costs by measuring emissions and only exhaust-heated or air-conditioned air when needed.
Consulting Engineers
Your analytical skillset makes you an invaluable asset to your organisation. Though your job is to design systems and operating sequences that meet energy codes to make facilities run more efficiently, you constantly find yourself collecting information and analysing data when it could be spent looking for new and innovative ways to save energy and improve building performance. Belimo ball valves provide:
- Models available with tight close-off up to 1000 psi to ensure dependable operation
- Spring return, non fail-safe, and electronic fail-safe actuator to drive the valve open or closed during power failure to meet sequence requirements
- NEMA 4 actuator options for harsh outdoor applications
- High Kvs full port ball valves for isolation applications
- Customer focused organisation with support documentation requirements for plans and specifications
Contractors & Distributors
- Easy selection, installation, and hassle-free service
- Models with tight close-off up to 1400 kPa to ensure dependable operation
- Range of media temperature ratings suited for steam, chilled and hot water applications
- Assembled with rotary actuators offering easy field assembly and installation saving you time
- Fast delivery with extensive support
Building Owners
Building expansion and tenant improvements are a constant challenge to your facility department and the value of your property. You are having difficulty keeping clients comfortable, identifying ways to optimise your HVAC system, and preserving capital budgets. Belimo ball valves can offer:
- High performance VB series ANSI Class I50 or 300 carbon steel bodies which are ideal for aggressive applications
- 0% leakage or ANSI Class VI rating increasing plant Delta T efficiency and building comfort
- Serviceable trim components on VS and VSS series valves reducing replacement cost
- High Kvs ball valves with minimal pressure drop, which are ideal for isolation application where pumping costs are high
- NEMA 4 actuator options for harsh outdoor applications which assure long service life
Facility Managers
Higher energy prices combined with costly building inefficiencies are making your job more and more difficult to perform. While you should be looking for new and innovative ways to reduce energy consumption and improve facility performance, you’re simply too busy dealing with employees, troubleshooting technical issues, and trying to combat costly problems with more money. Belimo ball valves can provide:
- Excellent control stability maintaining occupant comfort level
- Better control to prevent “hunting” of the control loop, increasing life span of actuator and valve
- Models available with tight close-off up to 1400 kPa to ensure dependable operation
- Easy selection, installation, and service for improvement projects or retrofits
- Fast delivery and online technical support
ESCO
You are tasked with communicating to organisations how they can save energy and improve performance — but key opportunities are passing you by. Why? Most of your time is spent searching for new product innovations that are backed by proven and reliable energy savings data. Belimo ball valves offer:
- ANSI Class VI or 0% leakage rating offering increased plant Delta T efficiency and building comfort
- Tight close-off up to 1400 kPa to provide dependable performance
- Actuator to utilise full control signal for maximum resolution and precise control
- High Kvs ball valves with minimal pressure drop. These are ideal for isolation application where pumping costs are high
- Better control to prevent “hunting” of the control loop, increasing life span of actuator and valve
Commissioning Agents / Balancing Contractors
The responsibilities of your job are complex. Between managing and reviewing projects, along with balancing and commissioning systems, you’ve got a lot on your plate. What you’re looking for is an innovative product with proven energy savings data that meets your facility’s specifications without the hassle of a complex installation and/or costly maintenance requirements. Belimo ball valves offer:
- Manual override function to provide easy troubleshooting capabilities during start-up and commissioning
- MFT models with field selectable control and feedback signal, and running time to match design sequences and controller requirements
- Trending with Multi-Function Technology (MFT) models for system diagnosis
- Self-cleaning ball valve technology to provide superior clog resistance and ensure flow is maintained in heating and cooling systems
Related products
Belimo Duct Sensors (T/RH)
Applications
Belimo offers a wide range of air duct sensors covering all standard measurement values: temperature, humidity, dew point, CO₂, VOC’s, pressure and frost detection.
Providing the Reliability, You Know and Expect
Belimo offers a line of duct sensors covering measurement values for temperature, humidity, enthalpy, dew point, CO₂, VOC’s, pressure, and low temperature limit detection backed with UL certification and a 5-year warranty.
Accurate Reading
Belimo duct sensors offer a snap-on NEMA 4X, IP 65 enclosure for easy installation and commissioning, field selectable ranges, high accuracy and reliability, self-calibration features, and mounted accessories are included.
Specification
Measured values: Temperature, Frost, Safety temperature, Humidity, Condensation, CO₂, VOC, Differential pressure, Volumetric flow
Output signal: 0...5 V, 0...10 V, 4...20 mA, Switch, Modbus, BACnet, Pt100, Pt1000, Ni1000, Ni1000TK5000, NTC10k (10k2), NTC10k Pre (10k3), NTC10k Carel, NTC20k
Measuring range temperature (°C): -50...150 °C, -50...160 °C, -50...250 °C, -40...80 °C, -35...70 °C, -35...100 °C, -10...15 °C, 0...15 °C, 0...50 °C, 30...90 °C, 50...80 °C, 70...130 °C
Measuring range pressure (Pa): -150...250 Pa, -100...2500 Pa, 0...7000 Pa, 20...300 Pa, 50...500 Pa, 200...1000 Pa, 500...2500 Pa, 1000...5000 Pa
Mounting type: Average, Single point, Immersion
Probe length: 50 mm, 100 mm, 140 mm, 150 mm, 156 mm, 180 mm, 200 mm, 270 mm, 300 mm, 450 mm, 3 m, 6 m
Additional features: Manual reset, Auto reset, Auto or manual reset, Internal sensor, External sensor, Auto-Zero, 2 measuring systems
Display type: LCD, LED
Belimo Energy Valve™
Applications
The Belimo Energy Valve™ is a pressure independent control valve that in addition monitors coil performance and energy consumption. On request, it can also manage the Delta T and communicates with the IoT cloud.
Energy savings you can see
The Belimo Energy Valve™ provides pressure-independent flow control and transparent monitoring of heating or chilling systems. This ensures that it is not operated with too low a temperature spread (delta T). By measuring, calculating and visualising important system data and with the performance reports provided by Belimo, energy-efficient system operation is guaranteed for the entire service life. The Belimo Energy Valve™ can be connected to the Belimo Cloud, providing easy access to data and reports – anytime, anywhere.
Thermal energy management and billing made easier than ever
The unity of the certified Belimo Thermal Energy Meter™ and the enhanced Belimo Energy Valve™ allows for transparent thermal energy management. The two worlds of "energy control" and "certified energy measurement and billing" are now being united. Accurately measure and monitor thermal flows and energy consumption in heating and cooling systems with direct IoT-based cost accounting using a single device. The new MID-approved Thermal Energy Meters assure high accuracy and reliability, allowing for easy and efficient billing. Reliable measurement is only the beginning. The Belimo Energy Valve™ instantly controls the thermal flow and optimises the energy supply to the user. With this important combination Belimo is stepping into a new era of integrated thermal energy management and is bringing together what belongs together.
Belimo Energy Valve™ in HVAC Applications
This is a selection of common HVAC applications in which the Belimo Energy Valve™ comes into use. After a short description of each application, common reasons for poor efficiency or performance are identified. There is an explanation of how the EV addresses these problems, and which control modes and settings are recommended to achieve optimal performance.
Know where the energy is going
The Belimo Energy Valve™ is an IoT device, i.e. an intelligent pressure-independent valve that can be connected to the Belimo Cloud. Unique functions such as the Delta-T manager or the possibility of direct power control provide clarity, enhance efficiency and reduce costs. The Belimo Energy Valve™ consists of a 2-way or 3-way characterised control valve, a volumetric flow meter, two temperature sensors and an actuator with integrated logic.
Specification
Pipe connection: Flange, Internal and external thread
Certification: MID / EN 1434
Flow range (m³/h): 0.02...2.39 m³/h, 2.4...6.49 m³/h, 6.5...17.5 m³/h, 17.6...40 m³/h, 41...162 m³/h
Valve size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm
Fail-safe function: Non-fail-safe, Fail-safe
Belimo Non Fail-Safe Damper Actuators
Applications
Belimo rotary actuators without fail-safe can handle a magnitude of HVAC applications. Available in a wide range of nominal voltages and torques.
Versatile in Performance and Function
Belimo non fail-safe damper actuators are designed for use in a wide variety of HVAC damper applications. With our comprehensive torque range from 2 Nm to 160 Nm and the ability to direct mount on standard damper shafts or jackshafts, these solutions are ideal for controlling dampers found in AHU, PAU, VAV terminal units, fan coil units, and unit ventilators used in hospitals, schools/universities, and data centres.
Accuracy and Controllability
The Belimo non fail-safe return damper actuators use brushless DC motor technology, which is controlled by an Application Specific Integrated Circuit (ASIC) guaranteeing minimum torque over the entire operating range with no loss in performance due to temperature, supply voltage or speed.
Specification
Torque: 1 Nm, 2 Nm, 4 Nm, 5 Nm, 8 Nm, 10 Nm, 16 Nm, 20 Nm, 40 Nm, 160 Nm
Force: 50 N, 100 N, 150 N
Voltage AC/DC: 120 V, 230 V, 24 V, 48 V, 72 V
Control type: Open/close, 3-point, Modulating, Communicative, Hybrid (communicative / analogue)
Running time: 2.5...19 s, 20...49 s, 50...79 s, 80...99 s, 100...150 s
Mechanical interface: Form fit, Universal shaft clamp, Universal shaft clamp reversible
Auxiliary switches: 1x SPDT, 2x SPDT
Electrical connection: Cable, Connector plug, Terminals
Protection category: IP20, IP54, IP66/67
Belimo Outdoor Sensors (Air)
Applications
Belimo's outdoor sensors for temperature and humidity have IP65 protection and provide all common active and passive output signals as well as Modbus and BACnet, depending on the version.
Providing the Reliability, You Know and Expect
Outdoor mounted sensors designed to measure the outside temperature for efficient heating/cooling automation.
Efficient Air Quality
Outdoor mounted sensors equipped with a NEMA 4X / IP65 rated enclosure, snap cover and mounting plate for ease of installation are available with passive or active outputs and are compatible to major building automation systems. Combined temperature and humidity sensors with selectable relative humidity, absolute humidity, dew point and enthalpy outputs are available with optional BACnet and Modbus communications. These sensors measure the outdoor air to permit the DDC system to coordinate with actual building conditions ensuring accurate and efficient air quality. All outdoor sensors are UL certified and backed by a 5-year warranty.
Specification
Measured values: Temperature, Humidity, Light
Output signal: 0...5 V, 0...10 V, 4...20 mA, Modbus, BACnet, Pt100, Pt1000, Ni1000, Ni1000TK5000, NTC10k (10k2), NTC10k Pre (10k3), NTC20k
Additional features: Internal sensor, External sensor
Belimo Pipe Sensors (Water)
Applications
Belimo offers immersion and contact sensors. Choose the best mounting option for your temperature, pressure or flow measurements in and on the surface of pipes, boilers and tanks.
Seamless Integration
Belimo offers a line of immersion and surface mounted sensors for temperature, condensation, static pressure, differential pressure and flow for measuring in or on the surface ensuring reliable operation.
Fast Response
Belimo surface mounted sensors incorporate a spring-loaded brass contact and a unique snap-on enclosure design allowing for quick installation, easy commissioning, NEMA 4X / IP65 protection, and UL certification. The brass arched probe surface with a plenum rated cable offers remote installation. Both models ensure fast response and accurate hydronic temperature readings
Specification
Measured values: Temperature, Safety temperature, Condensation, Relative pressure, Differential pressure, Flow
Output signal: 0...5 V, 0...10 V, 4...20 mA, Switch, Modbus, BACnet, Pt100, Pt1000, Ni1000, Ni1000TK5000, NTC10k (10k2), NTC10k Pre (10k3), NTC10k Carel, NTC20k, 2...10 V, MP-Bus, 0.5...10 V
Measuring range temperature (°C): -50...150 °C, -50...160 °C, -50...250 °C, -35...90 °C, -35...100 °C, 30...90 °C, 50...80 °C, 70...130 °C
Measuring range pressure (bar): 0...1 bar, 0...2.5 bar, 0...4 bar, 0...6 bar, 0...10 bar, 0...16 bar, 0...25 bar, 0...5 bar, 0...35 bar
Mounting type: Single point, Immersion, Contact sensor
Probe length: 50 mm, 100 mm, 150 mm, 200 mm, 300 mm, 450 mm
Display type: LCD, LED
Belimo Quick Running Damper Actuators / Fast Running Actuators
Applications
Belimo Fast Running actuators (from 2.5 sec.) are available with rotary or linear movement.
Speed and Reliability
Belimo quick running damper actuators are available with rotary or linear actuators with open/close or modulating control. Field programmable types allow the running time, torque, operating range and position feedback to be optimised to the specific application. Cables, form-fits and clamps can be adapted individually upon request. Whether in room pressurisation fume hoods or VAV systems – the quick running actuators open and close air dampers fast to meet the critical needs of the system.
Versatile in Performance and Function
Whether in heating or cooling circuits, ventilation, extraction or VAV systems – the quick running actuators open and close air dampers at top speed. Quick running actuator ensures air performance in paint rooms, laboratories and other sensitive areas. Rugged motors, gearboxes and IP 54 housings guarantee a long service life even under the harsh conditions.
Specification
Movement type: Rotative, Linear
Fail-safe function: Non fail-safe, Fail-safe
Torque (Nm): 4 Nm, 6 Nm, 8 Nm, 16 Nm, 160 Nm
Force (N): 100 N
Stroke: 100 mm
Voltage AC/DC: 120 V, 230 V, 24 V, 48 V, 72 V
Control type: Open/close, 3-point, Modulating, Communicative, Hybrid (communicative / analogue)
Running time: 2.5...19 s, 20...49 s, 50...79 s, 80...99 s, 100...150 s, adjustable
Mechanical interface: Universal shaft clamp reversible, Universal shaft clamp, Form fit
Running time (fail-safe): 4 s, 30 s
Protection category: IP54, IP66/67
Belimo Room Units / Thermostate
Applications
Belimo room sensors and room operating units offer the architect an aesthetic and timeless design, the installer a quick assembly, the system integrator an easy commissioning and the end customer a comfortable indoor climate.
Belimo sensors for a healthy and comfortable room climate
The new room units (sensors and room operating units) are the perfect addition to the existing product range. With the expansion of the product range for visible areas of the room, Belimo offers architects an aesthetic and timeless design. Installers appreciate quick assembly, system integrators easy commissioning with a smartphone. End customers enjoy not only a comfortable and healthy room climate but also the intuitive operation.
Lean, timeless design.
Belimo room units impress with their aesthetic, timeless design and the shallow depth between 13 and 23 mm, depending on the sensor type. The room units can be seamlessly integrated into existing third-party controllers. They feature fast, tool-free assembly as well as high long-term measurement accuracy and short reaction times. The Belimo Assistant App enables simple commissioning of the active room sensors and their diagnosis with a smartphone. Thanks to Near Field Communication (NFC), parametrisation is possible even if the room sensor is not connected to the power supply.
Specification
Unit type: Room controller, Room operating units, Room sensor
Measured values: Temperature, Humidity, CO₂, Relative pressure, PM2.5_PM10, TVOC
Output signal: 0...5 V, 0...10 V, Modbus, BACnet, Pt1000, Ni1000, Ni1000TK5000, NTC1k8, NTC10k (10k2), NTC10k Pre (10k3), NTC20k, 2...10 V, MP-Bus
Mounting type: Wall mount, Room, Flush mount, Ceiling mount
Additional features: NFC, Manual override and setpoint, Manual override
Display type: Belimo Display App, Belimo Display App and LED, LED, Touchscreen, ePaper touch display, ePaper touch display and LED
Belimo Zone Valves
Applications
Belimo ZoneTight™ zone valves and actuators are designed for maximum efficiency in tight spaces.
Efficient in Every Way
Designed for maximum efficiency in tight spaces, Belimo’s ZoneTight zone valve offering sets new design and performance standards for both pressure dependent and pressure independent zoning applications. Unlike short stroke globe valves, the self-cleaning ball helps minimise energy losses caused by clogging and eliminates overflow from pump pressure seat lift. In addition, high close-off capabilities ensure shut-off and allow for true equal percentage flow characteristics.
Super Compact and Versatile
Unlike short stroke globe valves, the zone tight self-cleaning ball helps minimise energy losses caused by clogging and eliminates overflow from pump pressure seat lift. Also, high close-off capabilities ensure shut-off (0% A – AB leakage) and allow for true equal percentage flow characteristics. Belimo’s ZoneTight zone valves are designed for maximum efficiency in tight spaces.
Specification
Product type: Valve, Valve-actuator unit
Pattern: 2-way, 3-way
Pressure-independent: YES, NO
kvs range (kvs): 1.1...3.0 kvs, 3.1...6.5 kvs, 6.6...14 kvs
Valve size (mm): 15 mm, 20 mm, 25 mm
Fail-safe function: Fail-safe
Voltage AC/DC: 230 V, 24 V
Control type: Open/close
Running time: 2.5...19 s
Electrical connection: Cable
