Ball Valves Three Piece, Full Bore (Screw End, Socket Weld) (150#, 300#, 600#, 800#) - Image 1
Ball Valves Three Piece, Full Bore (Screw End, Socket Weld) (150#, 300#, 600#, 800#) - Image 2
Click to enlarge
Ball Valves Three Piece, Full Bore (Screw End, Socket Weld) (150#, 300#, 600#, 800#)
Ball Valves Three Piece, Full Bore (Screw End, Socket Weld) (150#, 300#, 600#, 800#) - Image 2

Ball Valves Three Piece, Full Bore (Screw End, Socket Weld) (150#, 300#, 600#, 800#)

Technical Data :

Design Std. As per ISO 17292 & BS 5351
End Connection Screwed End/Socket Weld
Testing & Std. As per API 598 / ISO 5208
Size, 150# 15 mm to 50 mm (1/2″ to 2″)

Material (MOC)

Sr. No. Description Material
1 Body WCB / CF8 / CF8M
2 Adaptor WCB / CF8 / CF8M
3 Ball CF8 / CF8M
4 Steam SS304 / SS316
5 Gland SS304 / SS316
6 Seat Ring PTFE / GFT /CFT
7 Body Seal PTFE / GFT /CFT
8 Gland Packing PTFE / GFT /CFT
9 Steam Seal PTFE / GFT /CFT
10 Gland Nut MS/SS304
11 Lever Nut MS/SS304
12 Lever MS/SS
13 Stud MS/SS304
14 Stud Nut MS/SS304
15 Stud Washer MS/SS304
16 Lever Sleeve PVC

Dimensions 150#

Size NB F/F Thread Type
15 12.5 62.5 BSP/NPT/SW
20 19.0 74.0 BSP/NPT/SW
25 25.0 87.0 BSP/NPT/SW
40 38.0 109.0 BSP/NPT/SW
50 50.0 110.0 BSP/NPT/SW

All Dimensions are in mm

ENQUIRY!
Description

General Notes :

  • Customization and Automation as per customer requirements.
  • Certificate of compliance to EN10204 Type 3.1 as standard.
  • Safety stock as per customer requirements.
  • 100% factory tested and inspected valves as per standard.
  • Other trims also available as per customer requirements.
  • Support to customers for other product requirements from sources.
  • Consult to Factory for Torque and Other Details.

Related products

Ball Valves One piece, Fire safe-antistatic design, Reduced bore, Flange end (150#, 300#)

,
ENQUIRY!

Description

One Piece design features eliminates any possible and potential leak paths. Inserts holds the internal assembly in position. This creates a positive metal to metal sealing between body and insert which eliminates the leakage through flange. Ideally suitable for use in oil and gas production, refining and chemical applications. Body material and wetted trim components confirms to NACE standard MR 0175. Fire safe and Anti-static design where Hazardous areas with handling of flammable fuels, gases or chemicals are in use.

Technical Data :

  • Size Range: DN 50(2") – 200(8")
  • Pressure rating : ASME Class 150 to 300
  • Temperature range : Upto 260 deg. C
  • Seat : PTFE / Carbon Reinforced PTFE
  • End Connections : Flanged ASME B16.5
  • With & Without ISO PAD
  • MOC : WCB, PTFE, CF8, 304 S/S, 316 S/S, MS, CF8M, SS, Carbon R'PTFE
Quick view

BUTTERFLY VALVE EPDM & EPDM + PTFE seated Centric design

ENQUIRY!

Applications :

Food and beverages, slurries, pneumatic conveying, dry bulk conveying, chemicals, paper stock, mineral processing.
This type of valve is highly suitable where bubble-tight shut off with maximum flow area is required.

Suitable for on-off and control services

TECHNICAL DATA

Size: 2” (50 mm) to 20” (500 mm)

Type: Wafer & Lug

Design: Centric Bi-directional

Pressure: PN10, PN16

Seat: EPDM, PTFE + EPDM

Flange Suit To: ANSI 150#, PN10, PN16, BS Table 

Design, Manufacturing and Testing Standards – Technology at a Glance

Kansei EPDM and PTFE Centric Bi-directional Butterfly valves are designed to ensure a bubble tight shut off in both direction and provide a Maximum flow area.
“A major advantage of Kansei product is an International compatibility.”

The Exclusive Design of two-piece body with one-piece wafer-thin disc stem provide the very less obstruction to flow. Body locating holes provide easy placing and perfect centering of the valve between the flanges.

Rounded & Buffed disc edge gives full concentric sealing with lower torque, which gives longer seat life.

Kansei designed Primary stem sealing accomplished by a preinstalled contact between seat surface and rounded disc hub area which overtake the pressure rating of valve and prevents the leakage through the stem area to atmosphere.

An inbuild ‘O’ ring on the seat surface provide flange sealing and eliminates the need for additional flange gasket.

The seat is completely field replaceable and isolated from line media which allows superior performance of valve with extended service life. The seat design in such a way to ensure seal drop-tight and bi-directional at low to high pressure range.

Split body for easy maintenance.

This product is not recommended for dead end services.

This type of valve can be installed in vertical or horizontal pipeline and any intermediate orientation.

  • Design standard as per EN 593/BS 5155 as standard, another applicable standard on request.
  • Testing standard as per API 598 or EN 12266-1 as standard.
  • Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
  • Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
  • Trims available with combination of various Casting material like CI/ DI/ WCB/ CF8/ CF8M/ CF3M/ GR. 4A-5A/ etc. and Seat Material like EPDM / EPDM+PTFE etc.
  • 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
Quick view

BUTTERFLY VALVE High Performance Double Offset

ENQUIRY!

Applications :

Pharma, Military, Sour gas, Food Processing, Vacuum and Oxygen services, Steam services, Dead-end services, Fire, Chemical industry e.g. Chlorine-Ammonia etc., Reverse Osmosis, Slurry services, Modulating or Special fluids where Flow control is Important.

TECHNICAL DATA

 Size: 2” (50 mm) to 36” (900 mm)

Type: Wafer, Lug, Flange

Design: Eccentric-Double offset

Pressure: ANSI Class 150-300

Seat: RTFE, PTFE, UHMWPE, Metal, Fire Safe

Flange Suit To: ANSI 150#,300#

Design, Manufacturing and Testing Standards – Technology at a Glance

Kansei Wafer, Lug and Flanged Double offset butterfly valves are designed to ensure minimum seat wear, zero leakage shutoff throughout the full pressure range and Uni-Bidirectional to provide a long service life with minimum maintenance.
“A major advantage of Kansei product is an International compatibility.”

The Superior two-piece stem design and double offset disc/stem design allows high cycling and eliminates seat deformation when the disc is in the open position. At the initial point of disc opening, the offset disc produces a cam action and pulling the disc from the seat. During opening, disc does not contact the seat which ensures the maximum seat service life with reduced operating torques. The first offset is by locating the stems downstream of the center line of the seat which allows 360-degree unobstructed sealing surface. The second offset is by locating the stems off-center of the vertical axis of the seat. As the valve closes, the camming action converts the rotary motion of the disc to a linear motion which effectively push the disc on seat.

Mounting pads integrally casted which provides direct mounting of Gear box and Actuators on valves. Torque requirements of the Kansei High performance double offset valve is significantly lower.

The seat is completely isolated from all contact with the line media which allows superior performance of valve with extended service life. Serrations of the seat retainer ring and body secure the seat assembly in place irrespective of disc position. Line media seals to Zero-leakage in both directions and seat is self-adjusting to absorb wear and temperature changes. Replacement of seat is also easy without disturbing the disc or stem.

The seat design in such a way to ensure seal drop-tight and bi-directional at low to high pressure range. Seat incorporates a Stainless-Steel wire winding with U-shape envelope to provide better seat life. The wire allows flexibility in both direction of flow.

Fire safe: Kansei High performance double offset valves having firesafe seat design options in wafer, lug and flange valves. Fire safe design combines superior performance, extended service life. In normal service, the fire safe design with Soft seat and Metal seat to ensure zero-leakage in both directions of line media flow in full rated pressure and temperature range. In the fire condition, soft seat will be destroyed either partially or fully by excessive heat and metal seat will take place to provide constant sealing. Fire safe packing arrangement with three rings of graphite to create a superior and high temperature sealing.

  • Design standard as per EN 593 or API 609 (cat. B) as standard, another applicable standard on request.
  • Testing standard as per API 598 and FCI 70-2.
  • Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
  • Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
  • Trims available with combination of various Casting material like WCB/ CF8/ CF8M/ CF3M/ GR. 4A-5A/ NAB/ Aluminum Alloys etc. and Seat Material like RTEF/ PTFE/ UHMWPE/ METAL/ FIRE SAFE.
  • 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
Quick view

BUTTERFLY VALVE Large Size Double Flanged, Eccentric Design

ENQUIRY!

Applications:

Power plants, Water works, Municipal water treatment, Cooling systems, Industrial applications etc.

TECHNICAL DATA

Suitable for on-off and control services

Size: 20” (500 mm) to 80” (2000 mm)

Type: Double Flanged

Design: Eccentric

Pressure: PN6, PN10, PN16, PN20, PN25

Seat: EPDM, BUNA-N, VITON

Flange Suit To: PN6, PN10, PN16, PN20, PN25,ANSI, JIS ANSI, BS, DIN, ISO, IS

Design, Manufacturing and Testing Standards – Technology at a Glance

Kansei Double flanged Eccentric Large Butterfly valves are designed to accommodate Flange drilling JIS, ANSI, DIN, BS. Also providing dead-end service capability with downstream piping removed. Each size valve flange has been designed to have the maximum outside diameter and maximum thickness of the nominated flange standards. K35 type valves provides the robust features to ensure reliable performance and long service life.
“A major advantage of Kansei product is an International compatibility.”

The valve face to face in accordance with EN 558, BS 5155 Short, ISO 5752 Table 4, EN-593 and AWWA C-504, AWWA C-207. Mounting cast flange designed in accordance to ISO 5211.

The Replaceable Seat design meets the requirements of seat replaceability on field without special tooling, dismantling and removing the valve from line. Also provide better shut-off and longer service life. The seat is of a molded construction and fits easily into the body which also reduce seating torque with disc edge contours. The Seat is adjustable to optimize the required shut-off tightness to comply the torque both for unidirectional and directional operation.

The Eccentric design provides energy efficient flow control. Stainless steel disc edge protects against corrosion and eliminates the possibility of restricted sealing. Upper and Lower shaft bearings prevent shaft deflection and provide optimum guidance to increase the valve life. High strength and Full diameter Shafts remain dry and provides positive disc control with a minimum flow restriction.

Sleeve bearings are self-lubricated which allows valve installation with the shaft vertical or horizontal. Thrust bearings are provided with the adjustment to ensure good axial positioning of the disc due to forces applied by seat and shaft seals to the disc. The secondary seal is provided to seal the bearing area from environment, and it will also act as a primary seal in account of failure of primary seal, Rubber lining is additional option for this product.

  • Design standard as per EN 593, AWWA C-504, AWWA C-207 as standard, another applicable standard on request.
  • Testing standard as per API 598 or BS EN 12266-I as standard. 100% bubble tight shut off valve.
  • Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
  • Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
  • Trims available with combination of various Casting material like CI / DI / NICI / NIDI / WCB / CF8 / CF8M / CF3M/ GR. 4A-5A / NAB etc. and Seat Material like EPDM / BUNA-N / VITON etc. Coating and Lining as per Customer requirement.
  • 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
  • Gear / Pneumatic / Electric / Hydraulic Operation as per customer requirement.
Quick view

CHECK VALVE / NON RETURN VALVE ( NRV ) Screw End (PN16)

ENQUIRY!

TECHNICAL DATA

Design Std. As per API 602 / ASME B16.34
Testing Std. As per API 598
End Connection Screw end
Size 10 mm to 80 mm, PN16

Dimensions PN16

Size L A
10 50 9.53
15 60 12.7
20 70 19
25 80 25.4
30 95 31.75
40 105 38.1
50 130 50.8
65 160 63.5
80 185 76.2

 

All dimensions are in mm.

Quick view

CHECK VALVE / NON RETURN VALVE ( NRV ), Flange End (PN10, PN16)

ENQUIRY!

TECHNICAL DATA

Design Std. As per API 602 / ASME B16.34
Testing Std. As per API 598
End Connection Flanged End
Size 30 mm to 300 mm, PN10 / PN16

Dimensions PN10

Size Dia D L A
30 140 180 30
40 150 180 40
50 165 200 50
65 185 240 65
80 200 260 80
100 220 300 100
125 250 350 125
150 285 400 150
200 340 500 200
250 395 600 250
300 445 700 300

Dimensions PN16

Size Dia D L A
30 140 180 30
40 150 180 40
50 165 200 50
65 185 240 65
80 200 260 80
100 220 300 100
125 250 350 125
150 285 400 150
200 340 500 200
250 405 600 250
300 460 700 300

 

All dimensions are in mm.

Quick view

Forged Ball Valve

,
ENQUIRY!

Product Description

Size 1/4" to 2” (8mm to 50mm)
Pressure Rating ASME 150# to 900#
Design Standard BS EN 17292
Pressure / Temp. ASME B 16.34
Testing Std. BS 12266-1
Construction Bolted
End Connection Screwed, Socket Weld, Flanged, Butt-Weld, Nipple Extended
Operation Lever
Material A105N, LF2, F304L, F316L, F317, F321, F347,F5, F9, F11, F22, F91, F51, F53, F55, F60, Inconel, Monel, Alloy 20, Nickel Aluminium Bronze
Quick view

S-Series -Ball Valves Screwed End – V-TORK CONTROLS

,
ENQUIRY!

Ball Valves are quarter turn — straight through valves, got its name from the ball that rotates to open & close the valve. Ball valves are widely used in applications where tight shut off is required. V-TORK manufactures Ball valves of 5 different types which are able to transfer gases, Liquids & air. The Main advantages are the superior ease of operation, Low purchase & maintenance cost, rugged construction and longer service life.

S SERIES

Specifications

  • 2 Way
  • Screwed, But Welded, Socketed
  • Size ½” to 2” (15mm to 50mm)
  • Class#150, 300, 600, 800
  • Metal Seated/ Soft Seated
  • Standard: BS 5351 / ISO 17292

Applications:

Range of Seat Materials
PTFE/ CFT/GFT/PEEK/ Metal seat.

Range of Material of Construction
WCB / LCB / A105 / CF8 / CF8M / F304 / F316 / CF3 / CF3M / CD4MCU / CN7M & any special metallurgy on customer request.

Range of Actuators
Manual – Lever Operated, Gear Operated, Pneumatic Actuated, Motorized with Complete Automation

Quick view