Ball Valves One Piece Full, Bore Screw end (150#)
Technical Data :
Design Std. | As per ISO 17292 & BS 5351 |
End Connection | Screwed End |
Testing & Std. | As per API 598 / ISO 5208 |
Size, 150# | 15 mm to 50 mm (1/2″ to 2″) |
MATERIAL (MOC)
Sr. No. | Description | Material |
1 | Body | WCB / CF8 / CF8M |
2 | Cap | WCB / CF8 / CF8M |
3 | Ball | CF8 / CF8M |
4 | Steam | SS304 / SS316 |
5 | Gland | SS304 / SS316 |
6 | Seat Ring | PTFE / GFT /CFT |
7 | Body Seal | PTFE / GFT /CFT |
8 | Gland Packing | PTFE / GFT /CFT |
9 | Gland Nut | MS/SS304 |
10 | Lever Nut | MS/SS304 |
11 | Lever | MS/SS |
Dimensions 150#
Size | NB | F/F | Thread Type |
15 | 12.5 | 58.8 | BSP/NPT |
20 | 19.0 | 68.5 | BSP/NPT |
25 | 25.0 | 76.5 | BSP/NPT |
32 | 32.0 | 90.0 | BSP/NPT |
40 | 38.0 | 100.0 | BSP/NPT |
50 | 50.0 | 118.0 | BSP/NPT |
All Dimensions are in mm
Description
General Notes :
- Customization and Automation as per customer requirements.
- Certificate of compliance to EN10204 Type 3.1 as standard.
- Safety stock as per customer requirements.
- 100% factory tested and inspected valves as per standard.
- Other trims also available as per customer requirements.
- Support to customers for other product requirements from sources.
- Consult to Factory for Torque and Other Details.
Related products
Ball Valves One piece, Fire safe-antistatic design, Reduced bore, Flange end (150#, 300#)
Description
One Piece design features eliminates any possible and potential leak paths. Inserts holds the internal assembly in position. This creates a positive metal to metal sealing between body and insert which eliminates the leakage through flange. Ideally suitable for use in oil and gas production, refining and chemical applications. Body material and wetted trim components confirms to NACE standard MR 0175. Fire safe and Anti-static design where Hazardous areas with handling of flammable fuels, gases or chemicals are in use.Technical Data :
- Size Range: DN 50(2") – 200(8")
- Pressure rating : ASME Class 150 to 300
- Temperature range : Upto 260 deg. C
- Seat : PTFE / Carbon Reinforced PTFE
- End Connections : Flanged ASME B16.5
- With & Without ISO PAD
- MOC : WCB, PTFE, CF8, 304 S/S, 316 S/S, MS, CF8M, SS, Carbon R'PTFE
Belimo Ball Valves
Applications
The ball valve offers high close-off or change-over capabilities without leakage - that's efficiency.Achieve Control and Reliability
The R2, R3 and R6 series ball valves are available with non-spring return, spring return or electronic fail-safe actuators offering high close-off capabilities. The industrial ball valve series is a great solution for low and medium pressure steam applications up to 1000 kPa closed off pressure and applications that operate with a media temperature to 120º C.
High Performance for Aggressive Applications
Belimo industrial ball valves feature 2-way and 3-way configurations operated by rotary actuators. The actuators are controlled by a standard voltage for on/off, modulating, or floating point control which moves the valve to the position dictated by the control system. The series are Leakage rate A, air bubble tight preventing energy loss, which reduces operating costs.
Specification
Pattern: 2-way, 3-way kvs range (kvs): 1.1...3.0 kvs, 3.1...6.5 kvs, 6.6...14 kvs, 15...40 kvs, 41...170 kvs, 171...1000 kvs Valve size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm Pipe connection: Flange, Internal threadBUTTERFLY VALVE EPDM & EPDM + PTFE seated Centric design
Applications :
Food and beverages, slurries, pneumatic conveying, dry bulk conveying, chemicals, paper stock, mineral processing. This type of valve is highly suitable where bubble-tight shut off with maximum flow area is required.
Suitable for on-off and control services
TECHNICAL DATA
Size: 2” (50 mm) to 20” (500 mm)
Type: Wafer & Lug Design: Centric Bi-directional Pressure: PN10, PN16 Seat: EPDM, PTFE + EPDM Flange Suit To: ANSI 150#, PN10, PN16, BS TableDesign, Manufacturing and Testing Standards – Technology at a Glance
Kansei EPDM and PTFE Centric Bi-directional Butterfly valves are designed to ensure a bubble tight shut off in both direction and provide a Maximum flow area. “A major advantage of Kansei product is an International compatibility.”
The Exclusive Design of two-piece body with one-piece wafer-thin disc stem provide the very less obstruction to flow. Body locating holes provide easy placing and perfect centering of the valve between the flanges. Rounded & Buffed disc edge gives full concentric sealing with lower torque, which gives longer seat life. Kansei designed Primary stem sealing accomplished by a preinstalled contact between seat surface and rounded disc hub area which overtake the pressure rating of valve and prevents the leakage through the stem area to atmosphere. An inbuild ‘O’ ring on the seat surface provide flange sealing and eliminates the need for additional flange gasket. The seat is completely field replaceable and isolated from line media which allows superior performance of valve with extended service life. The seat design in such a way to ensure seal drop-tight and bi-directional at low to high pressure range. Split body for easy maintenance. This product is not recommended for dead end services. This type of valve can be installed in vertical or horizontal pipeline and any intermediate orientation.- Design standard as per EN 593/BS 5155 as standard, another applicable standard on request.
- Testing standard as per API 598 or EN 12266-1 as standard.
- Certificate EN10204 Type 3.1 as standard & Manufacturing under Quality system ISO 9001: 2015.
- Casting inspection as per MSS-SP-55 as standard. Another applicable standard on request.
- Trims available with combination of various Casting material like CI/ DI/ WCB/ CF8/ CF8M/ CF3M/ GR. 4A-5A/ etc. and Seat Material like EPDM / EPDM+PTFE etc.
- 100% factory tested (Hydro, Pneumatic) and Inspected valves as per standard.
CHECK VALVE / NON RETURN VALVE ( NRV ) Screw End (PN16)
CHECK VALVE / NON RETURN VALVE ( NRV ), Flange End (PN10, PN16)
TECHNICAL DATA
Design Std. | As per API 602 / ASME B16.34 |
Testing Std. | As per API 598 |
End Connection | Flanged End |
Size | 30 mm to 300 mm, PN10 / PN16 |
Dimensions PN10
Size | Dia D | L | A |
30 | 140 | 180 | 30 |
40 | 150 | 180 | 40 |
50 | 165 | 200 | 50 |
65 | 185 | 240 | 65 |
80 | 200 | 260 | 80 |
100 | 220 | 300 | 100 |
125 | 250 | 350 | 125 |
150 | 285 | 400 | 150 |
200 | 340 | 500 | 200 |
250 | 395 | 600 | 250 |
300 | 445 | 700 | 300 |
Dimensions PN16
Size | Dia D | L | A |
30 | 140 | 180 | 30 |
40 | 150 | 180 | 40 |
50 | 165 | 200 | 50 |
65 | 185 | 240 | 65 |
80 | 200 | 260 | 80 |
100 | 220 | 300 | 100 |
125 | 250 | 350 | 125 |
150 | 285 | 400 | 150 |
200 | 340 | 500 | 200 |
250 | 405 | 600 | 250 |
300 | 460 | 700 | 300 |
All dimensions are in mm.
Globe Valve – Flanged End (150#, 300#)
TECHNICAL DATA
Design Std. | As per BS 1873 / ASME B 16.34 |
End Connection | Flanged End |
Testing & Std. | As per API 598 or ISO 5208 |
Size, 150# | 25 mm to 300 mm (1” to 12”) |
Size, 300# | 50 mm to 300 mm (2” to 12”) |
Bill Of Material
Sr. No. | Description | Material |
1 | Body | WCB / CF8 / CF8M |
2 | Body seat | SS410 (13% CR)/CF8/CF8M |
3 | Disc | WCB +13% CR STEEL |
4 | Disc washer | 13% CR STEEL |
5 | Stem | SS410 / SS304 / SS316 |
6 | Disc Stem Nut | 13% CR STEEL |
7 | Gasket | SPW SS304 GRAPHITE FILL |
8 | Bonnet | WCB/CF8/CF8M |
9 | Stud | ASTM A193 Gr. B7 |
10 | Stud Nut | ASTM A194 Gr. B2H |
11 | Back Seat Bush | SS410/SS304/SS316 |
12 | Spacer | 13% CR STEEL |
13 | Packing | GRAPHITE |
14 | Eye Bolt | MS/SS |
15 | Eye Bolt Nut | MS/SS |
16 | Gland | SS410/SS304/SS316 |
17 | Hand Wheel | MALLEABLE IRON |
18 | Hand Wheel Nut | MS |
19 | Yoke Sleeve | EN8 |
Dimensions 150#
Size | Dia D | PCD | F/F |
25 | 110 | 79.5 | 127 |
40 | 125 | 98.5 | 165 |
50 | 150 | 120.5 | 203 |
65 | 180 | 139.5 | 216 |
80 | 190 | 152.5 | 241 |
100 | 230 | 190.5 | 292 |
150 | 280 | 241.5 | 406 |
200 | 345 | 298.5 | 495 |
250 | 405 | 362 | 622 |
300 | 485 | 432 | 698 |
Dimensions 300#
Size | Dia D | PCD | F/F |
50 | 165 | 127 | 267 |
65 | 190 | 149 | 292 |
80 | 210 | 168.5 | 318 |
100 | 255 | 200 | 356 |
150 | 320 | 270 | 444 |
200 | 380 | 330 | 559 |
250 | 445 | 387.5 | 622 |
300 | 520 | 451 | 711 |
POT-BASKET TYPE STRAINER (ANSI 150#, 300#)
Applications:
Strainer can be used in liquid as well as gas line, Regulator and valve protection, steam traps protections, flow meter and pump protections, heat exchanger and refrigeration set protection, Suitable for Hazardous environments. Y-Strainers and pot basket type strainers is a device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. Where the amount of material to be removed from the flow is relatively small, resulting in long intervals between screen cleanings, the strainer screen is manually cleaned by shutting down the line and removing the strainer cap.Technical Data :
Design Std. | As per ASME B16.34 |
Testing Std. | As per API 598 |
End Connection | Flanged Drill as per ANSI B16.5 |
Material | Body : IS 2062, Seal : NBR / PTFE / Graphite + SS, Mesh : SS |
Shell Wall Thickness | As per ANSI B16.34 |
Size | 2" to 18", Class 150, 300 |
Dimensions 150#
Size | F/F | A | B |
50 | 320 | 190 | 285 |
80 | 360 | 200 | 320 |
100 | 400 | 210 | 360 |
125 | 460 | 230 | 430 |
150 | 510 | 240 | 430 |
200 | 560 | 280 | 530 |
250 | 810 | 420 | 635 |
300 | 890 | 430 | 715 |
Dimensions 300#
Size | F/F | A | B |
50 | 380 | 200 | 305 |
80 | 420 | 235 | 400 |
100 | 475 | 260 | 405 |
125 | 510 | 275 | 435 |
150 | 620 | 295 | 490 |
200 | 630 | 345 | 560 |
250 | 900 | 390 | 690 |
300 | 1000 | 440 | 770 |
All dimensions are in mm.
S-Series -Ball Valves Screwed End – V-TORK CONTROLS
Ball Valves are quarter turn — straight through valves, got its name from the ball that rotates to open & close the valve. Ball valves are widely used in applications where tight shut off is required. V-TORK manufactures Ball valves of 5 different types which are able to transfer gases, Liquids & air. The Main advantages are the superior ease of operation, Low purchase & maintenance cost, rugged construction and longer service life.
S SERIES
Specifications
- 2 Way
- Screwed, But Welded, Socketed
- Size ½” to 2” (15mm to 50mm)
- Class#150, 300, 600, 800
- Metal Seated/ Soft Seated
- Standard: BS 5351 / ISO 17292