Belimo Outdoor / Protected Damper Actuators
Applications
Belimo IP66/67 NEMA 4X actuators are particularly suitable for utilisation in outdoor applications and are protected against UV radiation, rain/snow, dirt, dust, air humidity.
Reliability and Performance
Belimo IP66 / 67 housing design combined with extensive independent testing provides a complete, unmatched protection in extreme environments. The housings are weather-tight and corrosion resistant for the harshest indoor and outdoor conditions with UV protection. For high humidity or low temperature (-40°C) applications a heater option is available. These actuators are ideal for rooftop applications, indoor swimming pools, wood drying kilns, agriculture and food industries.
Belimo’s unique IP66 / 67 housing incorporates its damper actuator and valve product lines. The housing design provides complete, unmatched protection in extreme environments.
Specification
Fail-safe function: Non-fail-safe, Fail-safe
Torque: 6 Nm, 10 Nm, 16 Nm, 20 Nm, 40 Nm, 160 Nm
Voltage AC/DC: 120 V, 230 V, 24 V, 48 V, 72 V
Control type: Open/close, 3-point, Modulating, Communicative, Hybrid (communicative / analogue)
Running time: 2.5…19 s, 20…49 s, 50…79 s, 80…99 s, 100…150 s, adjustable
Running time (fail-safe): 4 s, 20 s, 30 s, 35 s
Auxiliary switches: 1x SPDT, 2x SPDT
Electrical connection: Cable: Terminals
Consulting Engineers
Your analytical skillset makes you an invaluable asset to your organisation. Though your job is to design systems and operating sequences that meet energy codes to make facilities run more efficiently, you constantly find yourself collecting information and analysing data when it could be spent looking for new and innovative ways to save energy and improve building performance. Belimo ball valves provide:
- Models available with tight close-off up to 1000 psi to ensure dependable operation
- Spring return, non fail-safe, and electronic fail-safe actuator to drive the valve open or closed during power failure to meet sequence requirements
- NEMA 4 actuator options for harsh outdoor applications
- High Kvs full port ball valves for isolation applications
- Customer focused organisation with support documentation requirements for plans and specifications
Contractors & Distributors
- Easy selection, installation, and hassle-free service
- Models with tight close-off up to 1400 kPa to ensure dependable operation
- Range of media temperature ratings suited for steam, chilled and hot water applications
- Assembled with rotary actuators offering easy field assembly and installation saving you time
- Fast delivery with extensive support
Building Owners
Building expansion and tenant improvements are a constant challenge to your facility department and the value of your property. You are having difficulty keeping clients comfortable, identifying ways to optimise your HVAC system, and preserving capital budgets. Belimo ball valves can offer:
- High performance VB series ANSI Class I50 or 300 carbon steel bodies which are ideal for aggressive applications
- 0% leakage or ANSI Class VI rating increasing plant Delta T efficiency and building comfort
- Serviceable trim components on VS and VSS series valves reducing replacement cost
- High Kvs ball valves with minimal pressure drop, which are ideal for isolation application where pumping costs are high
- NEMA 4 actuator options for harsh outdoor applications which assure long service life
Facility Managers
Higher energy prices combined with costly building inefficiencies are making your job more and more difficult to perform. While you should be looking for new and innovative ways to reduce energy consumption and improve facility performance, you’re simply too busy dealing with employees, troubleshooting technical issues, and trying to combat costly problems with more money. Belimo ball valves can provide:
- Excellent control stability maintaining occupant comfort level
- Better control to prevent “hunting” of the control loop, increasing life span of actuator and valve
- Models available with tight close-off up to 1400 kPa to ensure dependable operation
- Easy selection, installation, and service for improvement projects or retrofits
- Fast delivery and online technical support
ESCO
You are tasked with communicating to organisations how they can save energy and improve performance — but key opportunities are passing you by. Why? Most of your time is spent searching for new product innovations that are backed by proven and reliable energy savings data. Belimo ball valves offer:
- ANSI Class VI or 0% leakage rating offering increased plant Delta T efficiency and building comfort
- Tight close-off up to 1400 kPa to provide dependable performance
- Actuator to utilise full control signal for maximum resolution and precise control
- High Kvs ball valves with minimal pressure drop. These are ideal for isolation application where pumping costs are high
- Better control to prevent “hunting” of the control loop, increasing life span of actuator and valve
Commissioning Agents / Balancing Contractors
The responsibilities of your job are complex. Between managing and reviewing projects, along with balancing and commissioning systems, you’ve got a lot on your plate. What you’re looking for is an innovative product with proven energy savings data that meets your facility’s specifications without the hassle of a complex installation and/or costly maintenance requirements. Belimo ball valves offer:
- Manual override function to provide easy troubleshooting capabilities during start-up and commissioning
- MFT models with field selectable control and feedback signal, and running time to match design sequences and controller requirements
- Trending with Multi-Function Technology (MFT) models for system diagnosis
- Self-cleaning ball valve technology to provide superior clog resistance and ensure flow is maintained in heating and cooling systems
Related products
Belimo Ball Valves
Applications
The ball valve offers high close-off or change-over capabilities without leakage - that's efficiency.
Achieve Control and Reliability
The R2, R3 and R6 series ball valves are available with non-spring return, spring return or electronic fail-safe actuators offering high close-off capabilities. The industrial ball valve series is a great solution for low and medium pressure steam applications up to 1000 kPa closed off pressure and applications that operate with a media temperature to 120º C.
High Performance for Aggressive Applications
Belimo industrial ball valves feature 2-way and 3-way configurations operated by rotary actuators. The actuators are controlled by a standard voltage for on/off, modulating, or floating point control which moves the valve to the position dictated by the control system. The series are Leakage rate A, air bubble tight preventing energy loss, which reduces operating costs.
Specification
Pattern: 2-way, 3-way
kvs range (kvs): 1.1...3.0 kvs, 3.1...6.5 kvs, 6.6...14 kvs, 15...40 kvs, 41...170 kvs, 171...1000 kvs
Valve size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm
Pipe connection: Flange, Internal thread
Belimo BTU Meter / Thermal Energy Meters (TEM)
Applications
Belimo thermal energy meters meet the requirements of EN1434 and have type approval according to MID 2014/32/EU. Types without approval are equipped with glycol compensation, who reliably measure the energy even if there is glycol in the water.
Energy billing made easier than ever
Belimo's certified Thermal Energy Meters meet the requirements of EN 1434 and have type approval in accordance with the European Measuring Instruments Directive 2014/32/EU (MID). They provide validated data for invoicing purposes, which can be used for direct tenant billing. Our Thermal Energy Meters are also available as variant without MID / EN 1434 approval. They can reliably measure energy, even when there is glycol in the water. They automatically and continuously measure the glycol content in the fluid, compensate for it and, in doing so, ensure reliable ultrasonic volumetric flow measurement. This results in precise determination of the thermal energy. Belimo Thermal Energy Meters™ are designed to be multi-application devices, i.e. they can be used as heat application, cold application, or combined heat/cold application. They can also be installed either in the return pipe or in the supply pipe of the system. The application and installation position are provided to the valve during setup using a smartphone and the Belimo Assistant App or using a laptop and the built in web-server.
High-quality measurement
Multipoint wet calibration of the thermal energy meters
The new Thermal Energy Meters integrate energy metering and IoT-enabled billing in one device. They offer seamless and direct integration to the BMS or to IoT-based monitoring platforms, with IoT-based monitoring, performance improvement tools, and billing data. Bringing together performance features to save you time and money.
Specification
Certification: MID / EN 1434, Measured values, Temperature, Flow
Flow range (m³/h): 0.015...1.5 m³/h, 0.025...2.5 m³/h, 0.035...3.5 m³/h, 0.06...6 m³/h, 0.1...10 m³/h, 0.15...15 m³/h
Pipe size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm
Display type: LCD
Belimo Electronic Pressure Independent Valves (EPIV)
Applications
Belimo's pressure independent valve technology optimises the control of variable flow systems and helps maximise energy savings.
High Performance Solutions
Belimo pressure independent valve technology maximises energy savings of variable flow pumping systems while addressing unique control challenges. Belimo offers a series of pressure independent (PI) control valves; from the PIQCV, a super compact PI valve, ePIV an electronic PI valve offering true flow measurement to the Energy Valve that optimises, documents and proves water coil performance.
Energy Efficient Valves Providing Optimal Performance
With Belimo’s pressure independent control valve technology only a single valve is required to maintain proper flow through each circuit. Each valve arrives from the factory pre-set for each circuit and can be changed in the field, so there is no additional balancing required. The system performs perfectly from start-up. Pressure independent valves are used to regulate flow through air handlers, heating and cooling coils, fan coil units, unit ventilators and VAV re-heat coils.
Specification
Product type: Valve, Valve-actuator unit
PI-Technology: Electronic, Mechanical
Pipe connection: Flange, Internal and external thread, Internal thread
Valve size (mm): 15 mm, 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm
Fail-safe function: Non-fail-safe, Fail-safe
Voltage AC/DC: 24 V
Control type: Modulating, Communicative, Hybrid (communicative / analogue)
Running time (fail-safe): 35 s
Electrical connection: Cable
Belimo Linear Damper Actuators
Applications
Linear damper actuators are available with a variety of stroke lengths to meet specific application requirements.
Efficient Push and Pull
Belimo linear damper actuators are available with stroke lengths of 100, 200 or 300mm and on/off, floating point or modulating control. The comprehensive range of 150 N force to 450 N force are ideal for a wide range of applications such as louvres, diffusers, greenhouse windows and anywhere linear motion is required.
Powerful Linear Motion
Whether mounted horizontal or vertical, the actuator delivers a linear push or pull motion providing reliable and efficient performance for louvres, diffusers, skylights, greenhouse windows, or when retrofitting a system. Linear actuators offer simple installation, cost effective operation and flexible commissioning options.
Specification
Force (N): 50 N, 100 N, 150 N
Stroke: 60 mm: 100 mm
Voltage AC/DC: 120 V, 230 V, 24 V
Control type: Open/close, 3-point, Modulating
Running time: 2.5...19 s, 50...79 s, 100...150 s
Electrical connection: Cable, Connector plug
Belimo Non Fail-Safe Damper Actuators
Applications
Belimo rotary actuators without fail-safe can handle a magnitude of HVAC applications. Available in a wide range of nominal voltages and torques.
Versatile in Performance and Function
Belimo non fail-safe damper actuators are designed for use in a wide variety of HVAC damper applications. With our comprehensive torque range from 2 Nm to 160 Nm and the ability to direct mount on standard damper shafts or jackshafts, these solutions are ideal for controlling dampers found in AHU, PAU, VAV terminal units, fan coil units, and unit ventilators used in hospitals, schools/universities, and data centres.
Accuracy and Controllability
The Belimo non fail-safe return damper actuators use brushless DC motor technology, which is controlled by an Application Specific Integrated Circuit (ASIC) guaranteeing minimum torque over the entire operating range with no loss in performance due to temperature, supply voltage or speed.
Specification
Torque: 1 Nm, 2 Nm, 4 Nm, 5 Nm, 8 Nm, 10 Nm, 16 Nm, 20 Nm, 40 Nm, 160 Nm
Force: 50 N, 100 N, 150 N
Voltage AC/DC: 120 V, 230 V, 24 V, 48 V, 72 V
Control type: Open/close, 3-point, Modulating, Communicative, Hybrid (communicative / analogue)
Running time: 2.5...19 s, 20...49 s, 50...79 s, 80...99 s, 100...150 s
Mechanical interface: Form fit, Universal shaft clamp, Universal shaft clamp reversible
Auxiliary switches: 1x SPDT, 2x SPDT
Electrical connection: Cable, Connector plug, Terminals
Protection category: IP20, IP54, IP66/67
Belimo Smoke Control Damper Actuators
Applications
Powerful technology in a compact design and energy-efficient operation. Belimo smoke control damper actuators provide reliably keeping escape and rescue routes free of smoke.
Technology that Saves Lives
Belimo Smoke Control Damper Actuators designed for operation in smoke and combination fire and smoke dampers in ventilation and air-conditioning systems with a torque range from 15 Nm to 40 Nm @ 177°C. For maximum safety in all situations, Smoke Control Damper Actuators meet all codes for commercial buildings in the U.S., pass UL 555 and UL 555S at 177ºC and are tested for 30,000 open-closed cycles with approved dampers. Belimo Smoke Control Damper Actuators exceed UL’s requirement of 20,000 cycles at damper static load.
Safety in Buildings
Belimo Smoke Control Damper Actuators have an extensive torque range specifically designed for operation with fire, smoke, and combination fire and smoke dampers in ventilation and air-conditioning systems. As an integral part of the life safety system, Belimo provides high performance, low power consumption, and are compliant with Life Safety Codes and Standards.
Specification
Torque (Nm): 15 Nm, 25 Nm, 40 Nm
Voltage AC/DC: 230 V, 24 V
Control type: Open/close, Modulating
Angle of rotation: 95º, 100º
Electrical connection: Cable, Cable with connector plug
Belimo Valve Actuators
Applications
Belimo offers a comprehensive range of valve actuators - fail-safe or non fail-safe - with various control options to meet all needs of HVAC applications.
Versatile in Performance and Function
Belimo valve actuators are designed for use in a wide variety of HVAC applications to ensure proper performance and reliability and to lower power consumption. With a comprehensive torque range (5 Nm to 160 Nm) suitable for different valve sizes, valve actuators can be used for a variety of applications, including fast-running, fail-safe, outdoor, etc.
Accuracy and Controllability
Belimo Characterised Control Valves feature the innovative ball design and are operated by a rotary actuator. The actuators are controlled by a standard voltage for on/off, modulating, or floating point control which moves the ball valve to the position dictated by the control system. The valve is bubble-tight preventing energy losses and helps reduce operating costs.
Specification
Movement type: Rotative, Linear
Fail-safe function: Non-fail-safe, Fail-safe
Torque (Nm): 1 Nm, 2 Nm, 2.5 Nm, 4 Nm, 5 Nm, 8 Nm, 10 Nm, 16 Nm, 20 Nm, 40 Nm, 90 Nm, 160 Nm, 400 Nm, 650 Nm, 1000 Nm, 1500 Nm, 2000 Nm, 2500 Nm, 3500 Nm
Force (N): 1000 N, 1500 N, 2000 N, 2500 N, 4500 N
Voltage AC/DC: 120 V, 230 V, 24 V, 48 V, 72 V
Control type: Open/close, 3-point, Modulating, Communicative, Hybrid (communicative / analogue), Manual
Running time: 2.5...19 s, 20...49 s, 50...79 s, 80...99 s, 100...150 s, >150 s, adjustable
Running time (fail-safe): <20 s, <25 s, 30 s, 35 s, 60 s, <75 s
Auxiliary switches: 1x SPDT, 2x SPDT
Electrical connection: Cable, Terminals, Terminals with cable
Protection category: IP40, IP42, IP54, IP66/67, IP67
Belimo Zone Valves
Applications
Belimo ZoneTight™ zone valves and actuators are designed for maximum efficiency in tight spaces.
Efficient in Every Way
Designed for maximum efficiency in tight spaces, Belimo’s ZoneTight zone valve offering sets new design and performance standards for both pressure dependent and pressure independent zoning applications. Unlike short stroke globe valves, the self-cleaning ball helps minimise energy losses caused by clogging and eliminates overflow from pump pressure seat lift. In addition, high close-off capabilities ensure shut-off and allow for true equal percentage flow characteristics.
Super Compact and Versatile
Unlike short stroke globe valves, the zone tight self-cleaning ball helps minimise energy losses caused by clogging and eliminates overflow from pump pressure seat lift. Also, high close-off capabilities ensure shut-off (0% A – AB leakage) and allow for true equal percentage flow characteristics. Belimo’s ZoneTight zone valves are designed for maximum efficiency in tight spaces.
Specification
Product type: Valve, Valve-actuator unit
Pattern: 2-way, 3-way
Pressure-independent: YES, NO
kvs range (kvs): 1.1...3.0 kvs, 3.1...6.5 kvs, 6.6...14 kvs
Valve size (mm): 15 mm, 20 mm, 25 mm
Fail-safe function: Fail-safe
Voltage AC/DC: 230 V, 24 V
Control type: Open/close
Running time: 2.5...19 s
Electrical connection: Cable
