B-720 – Bi-Directional flanged Type Slurry valve (Long face to face) Knife Gate Valves – V-TORK CONTROLS
B-720
Specifications
- Bi Directional, Flanged Type
- Size 2” to 64” (50mm to 1600mm)
- Dual Elastomer Seals
- Single Piece Construction
- 2” to 30” 150 PSI CWP/ Above 30” 100 PSI
- Standard: V-TORK Std
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries
Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications.
Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling.
Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide.
Range of Material of Construction DI & Special Materials on Request
Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile
Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized
Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves, Reed Limit Switch.
Range of Addl. Features Purge Port, Drain Port, Stem Extension, Fail Safe System, Locking Arrangement, Non raising Stem arrangement.
Related products
2X-Series- Double eccentric high performance butterfly valves – V-TORK CONTROLS
Butterfly Valves
V-TORK Butterfly Valves are well suited for handling larger flow of Liquids and gases alternately of low pressure and for handling of liquids with suspended solids (Slurries).
2X SERIES
Specifications
- Size: 2” to 50” (40mm to 1200mm)
- Wafer, Lug, Flanged End
- Class #150.
- Double Eccentric Type
- Standard: BS 5155
Fabricated Valves as per customer requirement.
Applications:
Range of Material of Construction Disc: WCB / CF8 / CF8M / DI / CI & any special metallurgy on customer request; Stem: AISI 410 / 304 / 316; Body: CI / WCB / CF8 / CF8M Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile /PTFE /Metal Seat Range of Actuators Manual – Lever Operated, Gear Operated, Pneumatic Actuated, Motorized with Complete Automation
B-360 – Bi-Directional Two Piece type Knife gate valves – V-TORK CONTROLS
B-360
Slurry Knife Gate Valves
V-TORK slurry Knife Gate valves are designed for heavy duty purposes to isolate flow, even in the most demanding process conditions. The complete valve is built around an ease of maintenance concept which contains Purge port, Replaceable Retainer ring, Dual Elastomer Seals for long operational period. These Soft Seated Knife Gate Valve features a unique design that provides bubble-tight shutoff in either direction. The valve is designed for isolation and on/off applications in the paper, chemical, mining, power and waste water industries. It is designed to handle clean, dirt, viscous and corrosive Liquids, sludge, fibrous slurries, clean and corrosive gases.
Specifications
- Bi Directional, Flanged Type
- Size 2” to 40” (50mm to 1000mm)
- Resilient Seated (U-Seal)
- Two Piece Fabricated Construction
- 150 PSI CWP
- Standard: MSS SP-81, MSS SP-148, MSS SP-151
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves Range of Addl. Features Deflection cone, V-Orifice, Purge Port, Stem Extension, Fail Safe System, Locking Arrangement, Renewable seats, Non raising Stem arrangement.
B-540 – Bi-Directional Lug Type Slurry valve (Short face to face) Knife Gate Valves – V-TORK CONTROLS
B-540
Specifications
- Bi Directional, Lug Type
- Size 2” to 54” (50mm to 1350mm)
- Dual Elastomer Seals with Retainer Rings
- Single Piece Construction
- 150 PSI/300 PSI (18” to 54”) CWP
- Standard: V-TORK Std
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction DI / WCB & Special Materials on Request Range of Seat Materials EPDM /Natural Rubber (Special material on request) Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves, Reed Limit Switch. Range of Addl. Features Purge Port, Drain Port, Stem Extension, Fail Safe System, Locking Arrangement, Non-Raising Stem arrangement…
B-720 – Bi-Directional flanged Type Slurry valve (Long face to face) – V-TORK CONTROLS
B-720
Slurry Knife Gate Valves
V-TORK slurry Knife Gate valves are designed for heavy duty purposes to isolate flow, even in the most demanding process conditions. The complete valve is built around an ease of maintenance concept which contains Purge port, Replaceable Retainer ring, Dual Elastomer Seals for long operational period. These Soft Seated Knife Gate Valve features a unique design that provides bubble-tight shutoff in either direction. The valve is designed for isolation and on/off applications in the paper, chemical, mining, power and waste water industries. It is designed to handle clean, dirt, viscous and corrosive Liquids, sludge, fibrous slurries, clean and corrosive gases.
Specifications
- Bi Directional, Flanged Type
- Size 2” to 64” (50mm to 1600mm)
- Dual Elastomer Seals
- Single Piece Construction
- 2” to 30” 150 PSI CWP/ Above 30” 100 PSI
- Standard: V-TORK Std
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction DI & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves, Reed Limit Switch. Range of Addl. Features Purge Port, Drain Port, Stem Extension, Fail Safe System, Locking Arrangement, Non raising Stem arrangement.
U-106- Uni-Directional, Wafer type Bonnetted Knife gate valves – V-TORK CONTROLS
U-106 AWWA
Awwa Knife Gate Valves
V-TORK AWWA/water Knife Gate valve standard describes Bonneted / Bonnetless and one piece/two piece construction which is made of stainless steel /cast iron /ductile iron body with resilient or metal seated knife gate valves. Theses AWWA valves are especially used in water, wastewater, and sludge water systems. V-TORK Valves are specially manufactured by AWWA standard to suit critical water applications.Specifications
- UniDirectional, Wafer Type
- Size 2” to 120” (50mm to 3400mm)
- Bonneted / Bonnet Less
- Metal Seated / Soft Seated
- 150 PSI CWP
- Standard: AWWA C520-10
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves Range of Addl. Features Deflection cone, V-Orifice, Purge Port, Stem Extension, Fail Safe System, Locking Arrangement, Renewable seats, Non raising Stem arrangement.
U-160 – Uni-Directional Wafer type Knife gate valves – V-TORK CONTROLS
U-160
General Knife Gate Valves
V-TORK General Knife Gate Valves are specially designed and manufactured according to MSS SP/Customized to meet the worst working conditions in Pulp & Paper, Mining & Steel, Power & Chemical Industries, Water Treatment Industries to handle Semi-Solids, Abrasive Slurries, Dry-Ash, Chips, Fiber contents Pulps etc. The compact design of the valves facilitates light weight, minimum space for installing, easy operation and maintenance. The compact Knife Edged gate is manufactured from Stainless Steel Plates of various grades irrespective of Body material. The bottom of the Gate is having Knife type edge which can cut through Semi-Solid or Paste type Pulp with possible fiber and solid contents, Fly ash, Chemicals with solid contents and ensure smooth shutdown operation and tight shut-off. The Knife gate valves are available in wide range of material. Trim options are available to suit individual requirements for various working.
Specifications
- Uni Directional, Wafer Type
- Size 2” to 120” (50mm to 3000mm)
- Metal Seated / Resilient Seated
- Single Piece Construction
- 150 PSI CWP
- Standard: MSS SP-81, MSS SP-148, MSS SP-151
Applications:
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar Industries Bulk Handling (Solids & Powders): Pneumatic Conveying systems, Detergent Powders/Cake, Boiler bed ash, Carbon Black, Coal handling, Lime powder handling applications. Gas Application: Blast Furnace Gas in Steel industries, Pulverized coal fired lines in Thermal Power Plants, Hot gas handling. Powder Applications: Lime powder, Silica/ Magnesium Oxide/ Calcium Oxide/ Al Oxide/ Zyconium Oxide. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ Metal Seat Range of Actuators Hand Wheel, Lever Operated, Chain Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, Accumulator for Emergency Shut Off, Wear Rings, AFR, Speed Control Valves Range of Addl. Features Deflection cone, V-Orifice, Purge Port, Stem Extension, Fail Safe System, Locking Arrangement, Renewable seats, Non raising Stem arrangement.
U-304- Uni-Directional, Flanged type Bonnetted Knife gate valves – V-TORK CONTROLS
U -304 AWWA
Awwa Knife Gate Valves
V-TORK AWWA/water Knife Gate valve standard describes Bonneted / Bonnetless and one piece/two piece construction which is made of stainless steel /cast iron /ductile iron body with resilient or metal seated knife gate valves. Theses AWWA valves are especially used in water, wastewater, and sludge water systems. V-TORK Valves are specially manufactured by AWWA standard to suit critical water applications.Specifications
- UniDirectional, Flanged Type
- Size 2” to 120” (50mm to 3400mm)
- Bonneted / Bonnet Less
- Metal Seated / Soft Seated
- 150 PSI CWP
- Standard: AWWA C520-10
Applications
Water & Waste Water Treatment Plants, Paper, Mining, Power, Hydro Dams (Higher Size), Water Sludge, Treated Water, Service raw water, Sewerage, Thickened Sludge. Range of Material of Construction CI / DI / WCB / CF8 / CF8M / CF3M / CG8M / SMO254 / Duplex 2205 & Special Materials on Request Range of Seat Materials EPDM / Viton / Natural Rubber / Nitrile/ PTFE/ CFT/GFT Range of Actuators Hand Wheel, Bevel Gear, Pneumatic Double Acting/Single Acting Cylinder, Hydraulic Cylinder, Electro-Pneumatic Operation, Motorized Range of Accessories & Addl. Features Solenoid Valve, Limit Switch, Proximity Switch, Junction Box, Positioner, V-Port for Throttling, Purging Arrangement, Accumulator for Emergency Shut Off, Wear Rings, Deflection Cones, Nitride hardening
U-340 – Uni-Directional Flanged type Knife gate valves – V-TORK CONTROLS
Specifications
- Uni Directional, Flanged Type
- Size 2” to 120” (50mm to 3000mm)
- Metal Seated / Resilient Seated
- Single Piece Construction
- 150 PSI CWP
- Standard: MSS SP-81, MSS SP-148, MSS SP-151
